Optional custom colors:

Such as 4 black and 4 white or 2 black and 6 white

Applicable models:

for Toyota Avalon Limited XX50 GSX50 2018~2022

Note:

The main function of the reversing radar is to use the ultrasonic principle to send ultrasonic waves from the probe installed on the rear of the car or the bumper of the front of the car to reflect the sound wave probe when reversing, so as to calculate the actual distance between the car body and the obstacle.

Specification:

Function: Regional warning
After-sales service: one year
Alarm volume: 70dB (inclusive) -90dB (inclusive)
Working temperature range: -20℃-80℃
Test distance: 0.2m-0.8m
Display type: Original screen or original dashboard
Number of probes: 4/8
Voice function: visual reversing
Whether to disassemble the bumper: Yes

The sound prompts that the darker the color, the closer the distance
Object distance radar 50CM-30GM
Radar display yellow
Object distance radar 30CM-OCM
Radar shows red

Area detection digital radar
Radar detection is divided into three areas on the left, right and middle More detailed display of the obstacle position,70CM from the object enters yellow, 50CM enters orange, and 30CM enters red

Not affected by the environment
Good waterproof performance
Rain does not affect the use
High temperature resistance without false alarm

Original car micro-hole non-destructive installation
The original car reserved holes for installation to improve the driving safety factor of the car
(Some models are not reserved)

Hole position is smooth and without burrs Professional sleek punch artifact
The holes are smooth and beautiful without burrs

In D file
Front radar starts automatically
In D gear, the first 4 radars are automatically activated and displayed on the dashboard of the original car. When the vehicle speed exceeds 15KM/H, the radar will automatically turn off

When R gear
Automatic start of front and rear radar
When in R gear, 4 radars on the left and right of the front bumper, and 4 radars on the rear bumper are automatically activated. When an obstacle is detected by the radar, an alarm will sound、

3 Punch a hole in the center of the reserved hole,
or punch a hole at the measurement position.
4. Use the provided hole opener to polish it smoothly

13. Restore the wiring harness and detect the radar function

After receiving the radar, you can first test whether the radar is sensitive or not, it does not rule out that it will be damaged during transportation.
During the installation, the bumper can not be restored first, and it can be tested after being installed on the car.
When the bumper is restored, it can avoid repeated disassembly of the bumper.