Description
5.8G Technology & 300Mbps Transmission Speed
5.8G frequency makes long-range WiFi bridge has better anti-interference performance, good compatibility, and strong anti-adjacent channel interference, better than 2.4 G traditional CPE.
300Mpbs digital display wireless bridge, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible.The transmission speed between 2 bridges max is 300Mbps. However, the maximum wired network speed that can be achieved through RJ45 port is 100Mbps.
Built in 14dBi & Transmission Up to 3KM
Built in 14dBi directional antenna can significantly improve the transmission and reception performance of wireless signals.
It can automatically adjust the power to adapt to environmental changes. It can ensure smooth video no matter how close it is. The transmission distance can reach 3KM (barrier free), and the actual application distance should be less than 3KM.
Smooth video Monitoring
UeeVii CPE450 is a 3Km 5.8G wireless transmission equipment. It uses wireless communication technology to transmit network data using air as a medium to carry out long-distance PtP or PtMP interconnection. The working data link layer realizes the connection and transmission of local area networks.CPE450 optimizes the deep protocol of wireless video monitoring transmission to ensure high-speed video transmission and smooth video monitoring, and further optimizes the underlying wireless driver, with stronger anti-interference ability and better stability
More Applications
Extend your house network to the second building, such as garages, barns, shops, and even neighbors, without having to layout network cables, saving costs.
Outdoor IP65 Weatherproof
CPE58G bridge IP65 weatherproof is very suitable for outdoor use, with rain, dust, and antifreeze.
Easy to Pairing
Adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards(FCC). Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD), supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable
The FCC ID: 2A6EJ-CPE450,
The FCC ID: 2A6EJ-CPE450, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Accurate Operating Frequencies: The frequency range that complies with FCC Rule Parts 15E is 5180.1-5240.0 MHZ and 5745.0-5825.0 MHZ
Specification:
Master control: AR9344
DRAM: DDR2 64MByte
FLASH:8MByte
Wired Interface:10/100Mbps LAN*2
Transfer method: Direct Sequence Spread Spectrum (DSSS)
Modulation: OFDM/BPSK/QPSK/CCK/DQPSK/DBPSK
Network Standard:IEEE802.11n,IEEE802.11a ,IEEE802.3u
Supporting agreement: CSMA/CA,TCP/IP,IPX/SPX,NetBEUI,DHCP,NDIS3,NDIS4,NDIS5
Frequency Range:4900~6100MHz
Power consumption: ≤3W
Power scheme: POE 24V 1A
Antenna gain:14DBi
Management settings:WEP management,Telnet,Serial
Encryption:WEP encryption 64/128bits, WPA, WPA2, 802.1x
Operating temperature:-30℃~65℃
Package include:
2 * CPE450 Bridge
2 * POE Power Adapter (24V)
2 * Metal Hoop
2 * Ethernet Cable
1 * User Manual