Description
SOCOTRAN RS-510MG VHF Marine Transceiver IPX7 Wateroof Mobile Radio Class A DSC Walkie Talkie GPS
Main Function
Waypoint Recording Function, Navigate to the Corresponding Waypoint and Display the Diatance
Electronic Compass Function
Manually Input GPS Latitude and Logitude and Time
Standard NMEA Interface (RS-422 Protocal)
Channel Number Display Digits Selectable: 3 Digits(01B)/4 Digits(2001)
Support Lastest Marine Channel Standards and DSC Protocol Standards
FM Radio Function (76MHz-108MHz)
Distress Call Forwarding Function
ATIS Function
Speaker Vibration Draining Function
Weather Channel Alarm
Dual/Tri-watch Functions
Scan: Normal Scan and Priority Scan
General Specificatin
Frequency: TX: 156.000-162.000MHz, RX: 156.000-163.425MHz
RF Power: 25W/1W
Modulation Mode: 16K0G3E(FM), 16K0G2B(DSC)
Frequency Stability: ±10PPM
Operating Voltage: DC13.8V (±15%)
Channel Spacing: 25kHz
Operating Temperature: -20℃~+60℃
Antenna Impedance: 50Ω
Output Impedance (Audio): 4Ω
Dimensions(W×H×D ): 208×98×115mm
Weight: 1050g
Class A DSC GPS IPX7
● Support GPS, BD, SBAS Satellite-based Augmentation System, Compatiable with lnternal and External and GNSS Antenna ( For RS-510MG)
● DSC Call Reception and Transmission Records Can be Queried
● Full Dot Matrix Display
DSC OPERATION
MMSI Code Programming
ATIS ID Programming
Distress Call
Individual Call
Group Call
All Ships Call
Position Request Call/Polling
Request Call
Test Call
Medical Transport Call
Ships and Aircraft Call
DSC Log
Multiple-task Mode
Package Contain:
1*Hand Microphone
1*Mounting Bracket
1*Mounting Screw Package
1*DC Power Cable
1*GPS Data Cable
Precautions
1.Never use the distress call when your ship or personnel is not in an emergency.
2.Do not install the transceiver in hot, humid ang dusty areas.
3.The working voltage for the transceiver is 13.8V DC. If the power supply is 24V DC,please use a power converter (24V convert13.8V ), or the transceiver won't work.
4.Never directly connect to 220V AC power supply, thia will ruin the transceiver. If an abnormal odor or smoke is detected coming from the transceiver, turn off teh power immediately.
5. Do not transmit before connecting the antenna, it will ruin the transceiver.
6.After long time u8se, the heating panel becomes hot, this is normal state.