Pet Video Verify Mobile App!

Provide Pet Care For All Pets, Earn Money!!

Also Shop This Site With Our Mobile App!!

Download Here!


OVER 100,000 PRODUCTS ON THIS SITE AND WE ARE ADDING MORE!!!

FREE SHIPPING TO ANYWHERE IN THE WORLD ON MOST PRODUCTS!!!



Portable 12V 24V Car Battery Tester Battery Testing Tool With LED Indicator Fault Analyzer Overload Test BT170 / BT180

(No reviews yet) Write a Review
  • Portable 12V 24V Car Battery Tester Battery Testing Tool With LED Indicator Fault Analyzer Overload Test BT170 / BT180
  • Portable 12V 24V Car Battery Tester Battery Testing Tool With LED Indicator Fault Analyzer Overload Test BT170 / BT180
  • Portable 12V 24V Car Battery Tester Battery Testing Tool With LED Indicator Fault Analyzer Overload Test BT170 / BT180
  • Portable 12V 24V Car Battery Tester Battery Testing Tool With LED Indicator Fault Analyzer Overload Test BT170 / BT180
  • Portable 12V 24V Car Battery Tester Battery Testing Tool With LED Indicator Fault Analyzer Overload Test BT170 / BT180
  • Portable 12V 24V Car Battery Tester Battery Testing Tool With LED Indicator Fault Analyzer Overload Test BT170 / BT180
  • Portable 12V 24V Car Battery Tester Battery Testing Tool With LED Indicator Fault Analyzer Overload Test BT170 / BT180
  • Portable 12V 24V Car Battery Tester Battery Testing Tool With LED Indicator Fault Analyzer Overload Test BT170 / BT180
$18.04 - $19.14

Description

Battery detector description

Check the charging function:

Connect test equipment, start engine and turn off headlights, radio, etc. In this case, the green light

Must be lit. If the generator has no voltage or the voltage is very low, the red signal light will start to glow. Please check the tester

Is the connection correct? Otherwise, please contact the repair shop.

Check the charging level:

Turn on the headlights for 1-2 minutes, then turn them off. Remove the clamp from the battery and wait about 10 minutes before clamping again. Up.

Battery tester. The signal light will glow according to the state of the charged battery to indicate "full", "full"

Half full "or" a very low charge.

Battery startup test:

Charge it fully, remove the ignition coil connection, and test. Use the key to turn on the ignition or start the vehicle. engine

Failure to start (ignition interruption).

When the green LED light "Battery OK" lights up, it indicates that the battery is in a normal charging state.

(Battery load test:

Flip the mode selector switch to the load test terminal, connect the battery tester to the car and start the engine to observe

LED indicator status:

Full: 5-6 leds light up.

Middle: 3-4 leds light up.

Low: 2-1 LED light up If it does not light up it means that the battery capacity is very low, please charge the battery or replace the battery

Note: If the battery is in bad condition, the battery tester's signal light "BATTERYOK" will not light up.

Warning: Please use the battery tester in a safe area and follow the instructions. Park the car before the test

A safe area.


Product use

Used to check and test battery capacity, battery load capacity and charging capacity

Portable automotive battery tester for 12V cars and 24V diesel vehicles


Operation process

Attach the tester's red-black test clip to the battery under test, connect the positive electrode with red, and connect the negative electrode with black.

The corresponding LED display light of the tester gives instructions. (Note: Do not operate for too long)

View AllClose