Description
Motospeed Darmoshark M3 Wireless Bluetooth Gaming Esports Mouse 26000DPI 7 Buttons Optical PAM3395 Computer Mouse For Laptop PC
M3 Triple-mode Game Mouse Specifications | ||
Size | 129.55*66.12*39.23mm | |
Number Of Keys | 7KEY | |
Color | Black / White / Camel Color | |
Weight | Net weight 58±5G, Receiver 1.6G | |
Shell material | ABS | |
Apron | Black rubber | |
Foot Stickers | Teflon PTFE(black) | |
NANO Receiver | Built in Bottom | |
Left and right switch operating force | Kailh 60±5gf | |
Left and right switch life | 8000Ten thousand times | |
Middle key switch operating force | UniversalHuano65±10gf | |
Middle key switch life | 500Ten thousand times | |
Side key switch operating force | UniversalHuano65±10gf | |
Side key switch life | 300Ten thousand times | |
3DKey operation force | 100±20gf(vertical force at the center of the mouse button) | |
Encoder | Feng shi Wei qi F-SWITCH | |
Encoder life | 100Ten thousand circles | |
master control IC | Three-mode Telink micro-Telink solution,2.4G/Bluetooth 5.0/wired | |
Wire | Type-C Data cable five-core braided flash rope with magnetic ring | |
Wire length | Total wire length: 2M±1% | |
Interface | GildedUSB2.0 Type-C interface | |
Operating temperature | -10℃—50℃ | |
Working Humidity | 10-90%RH | |
Operating Voltage | USB Wired:DC5V±5% Wireless:DC3.7V | |
Working current | USB Wired:<50MA Wireless:lights are always on<15MA, dull<6MA | |
Lithium Battery | Capacity 500MAH;Endurance without light: About 130 hours between intervals of use (calculated for 8 hours of office work);About 83 hours of continuous use; | |
Operating System | Wired and 2.4G mode: WinXP/Win7/Win8/Win10/Win11/Macos | |
Bottom sensor Light | Infrared light | |
DPI/Return Indicator | On for three seconds and off | |
Photoelectric IC | PAM3395 | |
Highest Resolution | 26000DPI(driver can be set) | |
DPI factory default | 5partDPI cycle adjustment: 400 red, 800 blue (default), 1600 green, 3200 purple, 4800 orange | |
Wired/2.4G Return Rate | Adjustable buttons at the bottom: red light125HZ, blue light500HZ(default), green light1000HZ | |
Wired/2.4G return rate | Adjustable buttons at the bottom: red light125HZ, blue light500HZ(default), green light1000HZ | |
Bluetooth rate of return | The default 125HZ is not adjustable | |
SPI sampling time | Changes in sync with the rate of return: 8ms/2ms(default)/1ms | |
FPS Image Processing | 26000fps | |
Maximum speed | 650ips | |
Acceleration | 50g | |
Drive | only support Windows system | |
Wireless transmission distance | The measured distance in the office environment is about 10 m | |
computer connection | Plug and play in wireless mode, when wired and wireless are used at the same time, it is preferentially recognized as wired mode | |
Wake up from hibernation |
| |
charging indication | When the data cable is connected, the indicator light of the roller position is always red, indicating that it is charging, and it will turn off after it is fully charged. (Charging time is about 3-5 hours) | |
low battery indicator | When the wheel position indicator is blinking yellow,Indicates that the battery is low and needs to be charged,In order to ensure the normal use of the mouse(Slight deviation according to actual usage) | |
2.4G and Bluetooth mode indicators | When the three-position switch at the bottom is turned to the G icon, the green light at the position of the scroll wheel will be on for three seconds and turn off. | |
Bluetooth pairing operation | When the three-position switch at the bottom is turned to the B icon, press the left, middle and right buttons at the same time, the blue light at the position of the wheel will flash, and enter the pairing state. At this time, you need to turn on the Bluetooth device and search for the M3 Mouse to pair. After the connection is successful, the indicator light goes out. | |
2.4G pairing operation | When the three-position switch at the bottom is turned to the G icon, press the left, middle and right buttons at the same time, the green light at the wheel position will flash, and enter the pairing state. At this time, you need to insert the receiver. After the connection is successful, the indicator light will go out. (Note: The pairing is OK at the factory. If the 2.4G has no function, you can follow this step) | |
wired mode | When plugging in the type-c data cable connection, the wired mode is preferred. |
M3 driver download at: http://darmoshark.cn/qudongxiazai/45.html