Pet Video Verify Mobile App!

Provide Pet Care For All Pets, Earn Money!!

Also Shop This Site With Our Mobile App!!

Download Here!


OVER 100,000 PRODUCTS ON THIS SITE AND WE ARE ADDING MORE!!!

FREE SHIPPING TO ANYWHERE IN THE WORLD ON MOST PRODUCTS!!!



MINI EDFA Optical Amplifier 1550nm 4ports Output Power 16dBm Building Optical Fiber Equipment Used CATV FTTB Network

(No reviews yet) Write a Review
  • MINI EDFA Optical Amplifier 1550nm 4ports Output Power 16dBm Building Optical Fiber Equipment Used CATV FTTB Network
  • MINI EDFA Optical Amplifier 1550nm 4ports Output Power 16dBm Building Optical Fiber Equipment Used CATV FTTB Network
  • MINI EDFA Optical Amplifier 1550nm 4ports Output Power 16dBm Building Optical Fiber Equipment Used CATV FTTB Network
  • MINI EDFA Optical Amplifier 1550nm 4ports Output Power 16dBm Building Optical Fiber Equipment Used CATV FTTB Network
  • MINI EDFA Optical Amplifier 1550nm 4ports Output Power 16dBm Building Optical Fiber Equipment Used CATV FTTB Network
  • MINI EDFA Optical Amplifier 1550nm 4ports Output Power 16dBm Building Optical Fiber Equipment Used CATV FTTB Network
$677.52

Description

MINI EDFA Optical Amplifier 1550nm 4ports Output Power 16dBm Building Optical Fiber Equipment Used CATV FTTB Network

1. Descriptions


MINI EDFA 1550nm building optical amplifiers are mainly used in CATV FTTB network. With only 23mm thick aluminium alloy shell, it can be mounted in high-rise residence or in office buildings’ weak electrical box.

This machine adopts 5V power adapter, With five levels of voltage protection. Use safer and more convenient.


2. Features

DC +5V external power supply,5W low consumption.

Optical Input Power Range: -5 ~ +10 dBm

Optical Input Wavelength Range: 1530~1565nm

Optical power receiving range -10dBm ~ +10dBm,optical power output 13~24dBm.

Optical Output Port 1~4 port &Every output power: 13~18dBm

With output optical power control ON/OFF

Output Power Stability: ±0.1dBm

Noise Figure: ≤ 5dB @0dBm

C/N:≥ 50dB;C/CTB:≥ 63dB;C/CSO:≥ 63dB

Operating Temperature: -5 ~ +55℃

Dimension: 230mm(L)X 132mm(W)X 23mm(H)

1~4

Output Power, 

CATV Signal: max range +13~+18dBm each port;

Telecom Signal Range: 

BA Output: +13~+23dBm (one input one output)

PA Output: -10~+17dBm (one input one output)

5

Input Power,

CATV Signal:

max range -15~+10dBm; Recommended scope of use -3~+10dBm

Telecom Signal Range:

BA Input: +10~-10dBm

PA Input: -10~-35dBm

6

Battery Injection, 5VDC, Type-C Interface.

Please note that the input voltage range must be between 4~6V DC, otherwise, the machine will be burned.

7

5V DC Output,

Battery Power Supply, USB-A Interface

8

PUMP1 Laser ON/OFF, Press is on, bounce is off

9

Optical Input LED

10

5V DC Power Input LED

11

PUMP2 Laser ON/OFF,

Press is on, bounce is off

12

Power Adapter Input Interface, 5V DC/6.0A.

Please note that the input voltage range must be between 4 ~ 6vdc, otherwise, the machine will be burned.


Special instructions:The performance parameters of this manual according to the measuring method of GY/T 184-2002 < CATV system analog opticalfiberamplifier technical requirements and measuring method>, and tested in the following conditions.


Test condition: With standard optical fiber and standard optical receivercomposed the test link. Set 59 PAL-D analog TV channel signal at 550MHz frequency range under the specified link loss.

Transmit digital modulation signal at range of 550 MHz ~ 862MHz, the digital modulation signal level (in 8 MHz bandwidth) is 10dB lower than analog signal carrier level.

When the input optical power of optical receiver is -1dBm, measure the C/CTB, C/CSO and C/N.


Model guide

Model:

GF1550 -4*16dBm

I: Independent type Output port connector(same as input port)

Output port connector(SA: SC/APC; SP: SC/PC; FA: FC/APC; FP: FC/PC optional)

Output power(13-24dBm optional)

Label:



VI. after-sales service

1. I promise: products are free warranty for 13 months (to paste the factory serial number on the side of the device is identified by the factory starting time of day), and lifelong maintenance. Due to user misuse or irresistible natural factors caused by equipment failure, we will only be responsible for the maintenance, material costs and charge the appropriate fee.

2.  If the device fails, you should immediately contact your local dealer, or call our customer service center.

3. Fault device requires action by professional technicians on-site, so as to avoid equipment damage.

4. Special Note: for devices that was to open the maintenance by the user, our company will not be free warranty, only to the warranty and reasonable maintenance costs and material costs will be charged.

Cleaning and maintenance method for fiber optic connector

And a lot of times, we will drop light power outlet misjudgments for optical equipment failure, the actual fiber optic connector may be caused by dust or dirt, pollution, just proper cleaning and maintenance of fiber optic connector, you can troubleshoot. Below introduce operation method of cleaning and maintenance of fiber optic connector.

1. power off the device, carefully unscrew the fibre on activities from the adapter connector

2. with texture good lens tissue or carefully with a degreasing alcohol cotton light connector cleaning; such as degreasing alcohol cotton cleaning, cleaning is complete, also 1-2 minutes, let dry alcohol flavor of the active connector surface

 3. cleaning out fiber optic connection socket, access optical power meter,measuring output optical power, to confirm that the fiber optic connector has been cleaned.


4. clean the fiber optic connector back to the adapter, should pay attention to appropriate, in order to avoid too much force lets the adapter internal ceramic pipe rupture.


5. fiber optic connector after cleaning, the output light power is not normal, you should remove the adapter, unscrew another connector to clean it inside the machine; such as cleaning after the optical power remains low, at which point adapter might be contaminated, cleaning with the adapter. (Note: use caution when you remove the adapter operation in order to avoid damages fibers inside the machine. )


6. dedicated compressed air available for adapter cleaning or degreasing cleaning alcohol cotton section. With compressed air cleaning, compressed air nozzles of gas tank at the adapter of ceramic pipes, ceramic tubes blowing compressed air into clean; with fat alcohol cotton cleaning, carefully into the alcohol cotton ceramic pipe cleaning. Attention alcohol cotton into the direction of articles should always be consistent, otherwise may not be able to reach the ideal cleaning effect.


Pay special attention to


A. in the cleaning operation of fiber optic connector should be avoided with optical connection diagram on the human body or human eyes, so as to avoid causing wing damage on the human body or human eyes permanently burn!!!

B.  installing fiber optic connector, force should be appropriate, failure to do so may cause the adapter in the ceramic fragments. Ceramic Tubes once the fragmentation, the output light power will drop significantly, turning it slightly and fiber-optic connector, the output light power will be significantly changed.

C.  any operation on the fiber, without turning on the pump laser, or high power output causes the output fibre connector is burned out, thus giving rise to the output power is reduced.


Such as equipment changes lead to a section in this manual do not match, are subject to change without notice.


View AllClose