Description

Description

All gifts will be sent out after you receive the package and provide all 5-star reviews with product images

please contact us when you receive the package , thanks

LAUNCH X431 PRO3S+V5.0

2024 Version - LAUNCH X431 PRO3S+V5.0 10.1' Full System Full Function Diagnostic Tools,Read and Delete Fault Codes for All System , ECU Coding , Matching, Active Test, Gudie functions, 31+ Reset Service, work with X431 HDIII Heavy Duty Module can test both 12V vehicles and 24V trucks(Include Gasoline and Diesel) , RAM 3GB+ ROM 32GB(can extend up to 128GB), 2 Years Free Update + 5 Years Warranty...

Why choose launch X431 PRO3S+ V5.0？

1.【ALL SYSTEM DIAGNOSTICS FOR 12V CAR & For Cars & COMMERICAL/HEAVY DUTY TRUCK 】:

There are many other full-system diagnostic scanners on the market, but most of them only support 50-60 cars, and can only be used as cars or only trucks. Our launch X431 pro3s+ v5.0
supports both car and truck integration , Over 164 diagnostic software , 10,000+ models, and are constantly being updated, including 12V & 24V cars, trucks, buses,Machinery.....can Read DTCs, Clear DTCs, Read ,Data Stream, for all system, including ,engines/Auto Transmission /Airbags/Immobilizer/Key Coding/ABS/Cruise Control/Instruments/ Self Leveling Suspension systems /Seats /Doors /Gateway/Steering etc.

2.【2024 Newest Full systems DIAGNOSTIC TOOL+ ADVANCED OE-LEVEL FUNCTIONS】:

LAUNCH X431 PRO3S+ V5.0 can tool adds loads of OE-Level features as ➤Online Coding (compatible with VW, Audi, Skoda, Seat) ➤Setting & Changeover (adblue reset, unlock the engine after a collision, cancel ABS driving test, and more) for Benz ➤Modification for BMW ➤Offline Coding ➤Customization ➤Personalization, for worldwide vehicle brands, and keep growing.

3.【BI-DIRECTIONAL(ACTIVE TEST)

LAUNCH X431 PRO3S+ scan tool can actuate solenoids and actuators for active testing, send commands to many systems/components to test their working status, without using the vehicle controls. powerful data analysis function, not only engine system, but also ABS, SRS and gearbox and more. >>>Automatic generation of main system diagnosis report, for the car problem at a glance.

4.ECU Coding

Because every automobile actuator has a record code in ECU, which is the basis for automobile computer to mobilize their work. LAUNCH X431 PRO3S+ is equipped with advanced ECU coding function for addressing the following issues:

1. After you change the bad actuators or certain parts, you need to use this function to make a new code and recognize the new actuators.

2. By changing the code with the ECU coding, it’s easy to improve vehicle performance or stimulate high-end functions for the car.

3. ECU coding enables multiple car systems to recognize each other and then the actuators can start to work.

5.LAUNNH X431 V Support 60+ Kinds of Special Reset Service Functions:

Including Oil Reset Service ,Electronic Parking Brake Reset ,Steering Angle Calibration ,ABS Bleeding, TPMS (Tire Pressure Monitor System) Reset ,Gear Learning , IMMO Service 7.Injector Coding ,Battery Maintenance System, Diesel Particulate Filter (DPF) Regeneration ,Electronic Throttle Position Reset ,Gearbox Matching ,AFS (Adaptive Front-lighting System) Reset ,Sunroof Initialization ....
(note: 15 commonly used software is reset meru, others are in car software or truck software)

LAUNCH X431 PRO3S+ Diagnostic Tool Supports almost all reset functions.

CONTINUOUSLY GROWING WITH UPDATES!!!

1. OIL RESET – Reset the oil life systems every time the oil and oil filter are changed;

2. FUEL INJECTOR CODING– Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;

3. BRAKE RESET – Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;

4. SAS RESET – Perform steering angle sensor calibration and clear records;

5. BAT.RESET – Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.;

6. ABS BLEEDING– When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity;

7. ELEC.THROTTLE RLRN – Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state;

8. TPMS RESET – Tire pressure resetting is required to be performed after maintenance is performed;

9. Key CODING: Help ECU to recognize the new keys when you need to add new keys.

10. DPF REG – Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance;

11. GEAR(Crank Position Sensor Adaptive) LEARN – Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced. (Available in the system menu and free.Depending on the specific car models, not for all cars, ). and more and more function will be improved and optimized.

12. EPB RESET – Help replace and reset the brake pad.

13. AFS HEADLAMP RESET – Initialize the adaptive headlamp system.

14. SUNROOF INITIALIZATION – The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

15. SUSPENSION RESET – Adjust the vehicle body height sensor for level calibration.

16. GEARBOX RESET – Help complete the gearbox self-learning to improve gear shifting quality.

17. TIRE RESET – Set the size parameters of the modified or replaced tire.

18. A/F RESET – Set or learn Air/Fuel ratio parameters.

19. ADBLUE RESET(Diesel Engine Exhaust Gas Filter) – Reset urea after the diesel exhaust treatment fluid is replaced or filled up.

20. COOLANT BLEEDING – Activate the electronic water pump.

21. NOX SENSOR RESET – Reset catalytic converter learned value stored in ECU.

22. STOP/START RESET – Set up the automatic start-stop function in ECU.

23. SEAT CALIBRATION – Calibrate the memory in replaced or repaired seats.

24.TRANSPORT MODE – Deactivate the transport mode.

25. WINDOWS CALIBRATION – Perform door window matching to recover ECU initial memory.
26. AC SYSTEM RELEARN/INITIALIZATION.
27. EGR RESET.
28. RESET FUEL ALCOHOL LEVEL.
29. RESET FUEL TRIM.
30. HIGH VOLTAGE BATTERY DIAGNOSTICS.
31. GPF REGENERATION.
32. LANGUAGE CHANGE – Change vehicle system language.ect.

Note: You can find 21 kinds of commonly used reset functions in the reset menu, and other special functions in the car brand diagnostic softwares menu.

(Available in the system menu and free.Depending on the specific car models, not for all cars, ). and more and more function will be improved and optimized.

6.Multi-language support

LAUNCH X431PRO3+ support English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Hungarian, Finnish, Simplified, Czech, Turkish, Greek, Arabic, Danish Persian, Romanian, Serbian, Swedish, Chinese Traditional,You can switch any language you want

7.Accurate ADAS Calibration functions

Advanced Driver Assistance System (ADAS) is an electronic component in a vehicle, including various
safety functions of the vehicle, such as automatic emergency braking (AEB), lane departure warning (LDW),lane keeping assist, blind spot elimination, night vision camera and Adaptive lighting. (NOTE: Need to be purchased separately)

8.【FASTER, BEST HARDWARE AND MORE POWERFUL 】

LAUNCH X431 PRO3S+ has more advanced functions: Guiding Functions(compatible with Volkswagen and Audi),
Powerful 8-core 1.8GHz processor, 3GB Memory with 34GB Storage (can up to 128GB)
9.0 Android tablet, 10.1 touch screen, 7000mAh rechargeable battery (up to 10+ hours battery life)

9.12-in-1 graphic data flow / print data / print diagnosis report / record historical data:

powerful data analysis function, not only engine system, but also ABS, SRS and gearbox. >>>Automatic generation of main system diagnosis report, for the car problem at a glance. >>>Replay the frozen frame and record the history of the car. >>>Print out the data you want