Win Lifetime Free Updates for Launch X431 PAD V Elite During Anniversary Sale!

Here's what you need to do:

1.Purchase the PAD V Elite between March 17th and 27th.
2.Leave a 5-Star review with clear pictures.
3.Share unboxing or feature test videos on your social media.

Fulfill these requirements to be considered for lifetime free updates for your PAD V Elite!

The top 20 lucky buyers will be selected from all orders, and winners will be announced on April 15th.
Contact Seller with Screenshots after Receiving PAD V Elite.

LAUNCH reserves the final authority in interpreting the terms of this promotion.
Don't miss out on this exclusive offer!

What is the difference between EU Version and Global Version ?

1.EU Version and Global Version support the same functions.
2.The EU Version is designed for European customers and only supports working in the European region ( including Russia and UK).
3.The Global Version has no IP restrictions and can be used worldwide.

About Launch Global

We are LAUNCH Global Store with 12 years old store. Quality Assurance! 100% original products and best prices. We support wholesale and dropping order. Contact us for favorable price.

About Gifts

Please note that all gifts will be sent after you give us a positive review. Please contact the seller promptly after leaving five stars.

Product Profile:

This Android OS-based, tablet-style diagnostic tool incorporates the best possible coverage of OE-level diagnostics with multitasking capable software.

Using the powerful 8-core 2.0GHz processor and a 10.1 inch sunlight readable capacitive touch screen with a resolution of 1920 x 1200 pixels, it delivers quick and complete diagnostic functionalities which technicians need to diagnose, research and repair vehicles in one solution.

It has the following features: Intelligent Diagnose, Local Diagnose, SmartLink Super Remote Diagnose, X431 Remote Diagnose, Service Function, One-click Update, Diagnostic History, Diagnostic Feedback, TPMS, ADAS, Vehicle Coverage Lookup and Toolbox etc.

Upgrades compared to PAD V:

1. Add 2.5mm adhesive to the original upper cover, forming a sloping effect on the front side

2. Do not increase the total thickness of the main body, and cancel the original 3.0 TPU steps on the front

Smartlink 2.0 Upgrades:

1. Full fit screen design to prevent dust and fog inside the screen

2. Optimize WIFI antennas and modules to enhance WIFI signal strength

3. Change OBD16 to DB15 to improve connection firmness

4. Add heat dissipation hole design

J2534 Reprogramming Using SmartLink C:

Flash programming has become a common and profitable procedure in the repair and service of today’s vehicles. As part of the 21st Century Tune-up, reprogramming is often the only solution for problems ranging from driveability and loss of power to poor fuel economy and emissions related issues. SmartLink C V2.0 makes it easy. The SmartLink C V2.0 is a communication interface designed to support J2534 specifications for ECU reprogramming.

Except that the SmartLink C V2.0 can act as a VCI device and a SmartLink dongle, it also can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 reprogramming. In this case, the PC needs to install with the LAUNCH's J2534 tool, which can be downloaded from the
official website at www.cnlaunch.com.

Health report (Quick Test):

This function varies from vehicle to vehicle. It enables you to quickly access all the electronic control units of the vehicle and generate a detailed report about vehicle health.

On the test item selection screen, tap Health Report and turn on the ignition switch, the system will start scanning the ECUs.

Actuation Test:

This option is used to access vehicle-specific subsystem and component tests. Available test vary by vehicle manufacturer, year, and model.

During the actuation test, the display tablet outputs commands to the ECU in order to drive the actuators, and then determines the integrity of the system or parts by reading the ECU data, or by monitoring the operation of the actuators,
such as switching a injector between two operating states.

SmartLink super remote diagnostics:

SmartLink is a newly developed powerful service system dedicated to remote vehicle diagnosis and service. In the SmartLink ecology system, if a technician (SmartLink C V2.0) does not have time to puzzle through a touch vehicle
problem, he can seek a trusted second opinion or additional expertise on various vehicle issues from remote master technicians or repair shops (SmartLink B). SmartLink B enables the shop owner to greatly increase customer’s
retention and boost shop revenue by providing the professional technical assistance service.

Service Function:

This module provides an easy dial to quickly access the most commonly performed service functions. It offers coding, reset, relearn and more service functions, to help vehicles get back to functional status after repair or replacement.

The following service functions described below are based on the latest information available at the time of publication.

Due to continuing improvements, the available service functions are subject to change at any time. To enjoy more service functions, you are suggested to check for updates on a regular basis.

1. Maintenance Light Reset (Oil Reset)
This function enables you to reset the oil service for the engine oil life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and weather events.

2. Electronic Parking Brake Reset
This function enables you to reset the brake pad after replacing the brake pad.

3. Steering Angle Calibration (SAS Reset)
This function can reset the steering angle to zero to keep the car running straight.
It needs to be performed generally after replacing the steering angle position sensor, or after replacing the mechanical parts of the steering system (such as steering gear, steering column, tie rod ball head, steering knuckle), or after completing the four-wheel alignment, body repair, etc.

4. ABS Bleeding
This function allows you to perform tests to check the operating conditions of Anti-lock Braking System (ABS).

5. Tire Pressure Reset (TPMS RESET)
This function can reset the tire pressure and turn off the tire pressure MIL.

6. Crank Position Sensor Adaptive Learning (GEAR LEARN)
This function enables you to perform tooth learning for the car, to turn off the related Malfunction Indicator Light (MIL).

7. Anti-theft Matching (IMMO)
This function enables you to perform the anti-theft key matching function, so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car.

8. Injector Coding (INJECTOR)
This function can write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder,so as to control or correct the cylinder injection quantity accurately.

9. Battery Matching (BAT. RESET)
This function can reset the monitoring unit of the car battery, by clearing the original breakdown information about the lack of battery power to rematch the battery.

10. DPF Regeneration (DPF REG.)
This function can help remove PM (Particulate Matters) from the DPF filter by using combustion oxidation methods (such as high temperature heating combustion, fuel additive or catalyst reduce PM ignition combustion) to keep the performance of the filter stable.

11. Throttle Matching (ELEC. THROTTLE RLRN)
This function can utilize the diagnostic scanner to initialize the throttle actuator so that the learning value of the ECU returns to the initial state.
By doing so, the movement of the throttle (or idle motor) can be more accurately controlled,
thus adjusting the intake volume.

12. Gearbox Matching (GEARBOX)
This function can complete the self-learning of the gearbox and improve the shift quality.

13. AFS (Adaptive Front-lighting System) Reset
This function enables you to initialize the adaptive headlamp system.

14. Sunroof Initialization (SUNROOF)
This function can set the sunroof lock off, close in rain, memory function of sliding / tilting sunroof, outside temperature threshold, etc.

15. Suspension Level Calibration (SUS RESET)
This function can adjust the vehicle body height sensor for level calibration.

16. Headlight Matching (AFS RESET)
This function can initialize the adaptive headlight system. The headlight system can decide whether to automatically turn on the headlights based on the ambient light intensity, monitor the vehicle’s driving speed, body posture, etc., and adjust the headlight lighting angle.

17. Windows Calibration
This function is used to perform door window matching to recover the ECU initial memory, and recover the automatic ascending and descending function of power window.

18. Seats Calibration
This function is applied to match the seats with memory function that are replaced and repaired.

19. Tyre Reset
This function is used to set the size parameters of the modified or replaced tire.

20. Language Change
This function is used to change the system language of the vehicle central control panel.

21. A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.

22. Coolant Bleed
Use this function to activate the electronic water pump before venting the cooling system.

23. Transport Mode
To lower vehicle power consumption, user may perform the following operations: limit vehicle speed, not wake up the network for door open and disable remote key etc. In this case, deactivating transport mode is needed to recover vehicle being normal.

24. AdBlue Reset
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.

25. NOx Sensor Reset
NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in engine exhaust. If the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU.

26. Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU (provided
that the vehicle has a hidden function and supported by hardware).

27. IMMO Programming
This function enables you to perform read-write function for vehicle key, EEPROM, MCU, and EEPROM/FLASH data of vehicle engine/gearbox ECU.

28. AC System Relearn/Initialization
AC system relearn/initialization must be performed when the vehicle AC ECU or actuator is replaced or the ECU memory is lost.

29. Intelligent Cruise Control System
This function can match the intelligent cruise control system after the intelligent cruise control module is replaced or repaired.

30. Engine Power Balance Monitoring
This function can monitor crankshaft acceleration in the power stroke of each cylinder, to determine the relative power
provided by each cylinder.

31. Gas Particulate Filter Regeneration
After the GPF is used for a long time, fuel consumption is increased and engine output power is reduced. In this case, the GPF replacement or regeneration must be performed.

32. Motor Angle Calibration
When the rotor position detected by the motor angle position sensor is different from the actual rotor field position, motor angle calibration must be performed.

33. High Voltage Battery Diagnostics (HIGH VOLTAGE BATTERY)
This function is used for high voltage battery diagnosis and status information detection.

34. Turbocharging Matching
This function is used to match and learn the replaced parts of boost system learning, or reset the learning value of turbocharger.

35. Clutch Matching
This function is used for learning of clutch pedal position or switch.

36. FRM Matching
This function is used to clear the fault of light short circuit.

37. Rainfall Light Sensor
This function can adjust parameters of the rain sensor and light sensor.

38. Gateway Module Data Calibration
After the gateway control unit is replaced, the VIN may be inconsistent. In this case, this function needs to be performed to change the VIN.

39. ECU Reset
This function is used to reset the control unit after executing the coding function of certain systems.

Intelligent Diagnose:

Through simple wireless communication between the tablet and VCI, you can easily get the VIN (Vehicle Identification Number) information of the currently identified vehicle. Once the VIN is successfully identified, the system will retrieve it from the remote server and then guide you to vehicle information page without performing the step-by-step manual menu selection.

The vehicle information page lists all historical diagnostic records of the vehicle, which lets the technician have a total command of the vehicle faults. In addition, a quick dial to Local Diagnose and diagnostic function are also available on
this page for reducing the roundabout time and increasing productivity.

Changing Language:

The tablet supports multiple languages. To change the language of the tablet, please do the following:

1. On the home screen, tap Other Modules -> Tablet Settings -> Language & input -> Language.

2. Tap the desired language from the list and the system will change to the chosen language.

TPMS:

This module allows you to configure the tablet as TPMS activation & diagnostic tool, which provides the ability to trigger TPMS sensor, program TPMS sensor, perform the relearning procedure. It needs to work with the compatible TSGUN
device (sold separately).

Charging the Tablet:

Charging with the included power adaptor:

1.Connect one end of the power adaptor to charging port of the tablet, and the other end to the AC outlet.

2.The charging LED illuminates on the tablet solid red and a charging symbol will appear on the screen.

3.Once it illuminates solid green, it indicates that the battery is fully charged and the charging complete symbol
replaces the charging symbol. Disconnect the power adaptor from the AC outlet.

4.Press and hold the POWER button for about 3 seconds to turn on the tablet. The system starts initializing and then
enters the home screen.
To turn the tablet off, press and hold the POWER button until an option menu appears. Tap Power Off.

ADAS:

This module enables you to effectively and accurately calibrate a wide range of camera-based & radar-based driver assistance systems, e.g. the front camera for the lane departure warning system, the radar sensor for the ACC (Adaptive Cruise Control) or the camera for adaptive headlights. It needs to work with the specific ADAS calibration tool (sold separately).

Charging with the docking station

1. Locate the charging slot on the bottom of the tablet and docking station.

2. Align the charging slots, and then dock the tablet into the station to ensure that it is firmly seated on the docking
station.

3. Insert one end of the included power cord to the charging port of the docking station, then the other end into the AC
outlet. The charging LED on the tablet illuminates solid red while charging and a charging symbol will appear on the
screen.

4. Once it illuminates solid green, it indicates that the battery is fully charged and the charging complete symbol
replaces the charging symbol. Disconnect the power adaptor from the AC outlet.

Technical Specifications of Display Tablet:

CPU: 8-core Processor, 2.0GHz
Display: 10.1 inch touch screen with a resolution of 1920 x 1200
Memory: 4GB
Hard disk: 128GB
Connectivity:
• Wi-Fi (802.11 b/g/n/ac)
• Universal serial BUS ports (1 x Type-C + 1 x Type-A)
Camera: 8MP front-facing camera + 13MP rear-facing camera
Sensor: Gravity accelerometer + 3-axis acceleration sensor
Operating temperature: 0℃ ~ 50℃
Storage temperature: -20℃ ~ 70℃

Technical Specifications of VCI (Vehicle Communication Interface):

Size: 200mm x 110mm x 47mm
Working voltage: DC 9~36V
Power consumption: ≤ 6W
Communication: wireless and wired
Working temperature: 0℃ ~ 50℃

Software Update & Renew Subscription:

This module enables you to update the diagnostic software & App and frequently used software.

If the software subscription is due or expires, the system will prompt you to renew your subscription.

VCI (Vehicle Communication Interface)

The SmartLink C V2.0 dongle can work as a VCI (Vehicle Communication Interface)
device, together with the LAUNCH-specific diagnostic tool, or as a SmartLink Customer
device, requesting technical assistance from a master technician (SmartLink B).


The SmartLink C V2.0 device features powerful functions and it can be applied in the following situations:

1. When as a VCI (Vehicle Communication Interface), it needs to work in conjunction with the Diagnose module of the tablet, which is used to obtain vehicle data, and then send it to the tablet for analysis wirelessly or via data cable.

2. When as a SmartLink C (Customer) dongle, it does not communicate with the tablet, but it needs to work together with the SmartLink module of the tablet. The tablet is mainly used to issue remote diagnostic requests, and the SmartLink C dongle is networked to receive and execute commands from the remote SmartLink B (Business).

3. When as a local J2534 PassThru device, it can be used in conjunction with the PC installed with OEM diagnostic software.

Package List:

1 x Display tablet
1 x SmartLink C V2.0 device
1 x Docking station
1 x Diagnostic cable
2 x Power adaptors
1 x Data cable
1 x Password envelope
1 x Crossover cable
1 x Quick start guide