Description
Our products provide the following special services
(1)1-year warranty period: If all routers have quality problems within 1 year, our store supports free return and replacement of new products.
(2)Three-month warranty period: For products other than routers, if quality problems occur within three months, our store supports free return and replacement of new products.
Description
CPE850Q is an high power industrial 5G outdoor CPE with 5KM PTP/PTMP range. Comply with the next generation 802.11ac Wi-Fi standard, Qualcomm Chipset, combined 900Mbps high speed in 5.8G, equipped Gigabit WAN port, 3 times Ethernet data rate faster than 300Mbps model; It with LED display to show and configure CPE’s operation mode, Channel, IP address and Signal Strength, simple to do the Point to Point connection by reset button, no need to access into GUI.
900Mbps Data Rate & Gigabit WAN/LAN Ports
CPE850Q features 802.11ac Wi-Fi and 2*2 MIMO technology, 900Mbps wireless speed. Equipped with Gigabit Ethernet port ensures high speed internet access and more end users access.
5GHz frequency, more channels, lower latency, higher stability
5KM PTP/PTMP Distance
Designed in two line Power Amplifier on PCB board, the power can be 300mW high power, 15dBi MIMO high gain panel antenna, greatly increase the Wi-Fi range to 5KM distance, then supply the stable Wi-Fi signal for users.
LED Display
CPE850Q with LED display to show AP/Client operation mode, Channels, IP address and RF Power; What’s more, it is easy to setup CPE850Q operation mode, IP address, Channels by set switch on product, no need to access into GUI, avoid the complex setup program, simple to check the working status.
Power over Ethernet
CPE850Q has integrated IEEE802.3af 48V PoE, (passive Power over Ethernet is optional), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Main Features:
-Comply with IEEE 802.11ac/a/n, 5GHz,900Mbps Data Rate
-1*10/100/1000Mbps WAN Port, 1*10/100/1000Mbps LAN Port
-300mW high power, build in 15dBi MIMO panel antenna, stronger signal strength, more wireless coverage
-Support 48V IEEE 802.3af PoE, passive PoE, 24V is optional
-Support SSID broadcasting, Muiti SSID up to 4, then support tag VLAN based on SSID.
-Support Gateway (PPPOE, static IP, dynamic IP), Wireless AP, Repeater, WISP, WDS operation mode
-With function of build in firewall, IP filter, URL filter and MAC filter
-Comply with IEEE 802.3az standard, RF power adjustment and frequency analyzer for better application in different environment
-Support DDNS, VPN pass through, Port forwarding and DMZ host
-Support 64/128-bit WEP security, 128bit WPA (TKIP/AES) security
Specifications
Standard: 802.11ac/a, MIMO technology
Memory: 128MB DDR2 RAM
Flash: 16MB
Power consumption: 48V PoE, <15W
ESD: ±6KV
Surge: ±2KV
Water Proof Level: IP65
Environment:
Operating Temperature: -30~55 ℃
Storage Temperature: -40~70 ℃
Humidity: 5%~95% non-condensing
Size: 260mm * 85 mm * 45mm
Operation mode: Wireless AP, Client
Wireless Security: 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption
Firewall:
DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter
IP and MAC Address Binding
Protocols: IPv4
Package
2*900Mbps Dual Band wireless access point
2*Ethernet Cable
1*Quick Installation Guide
Shipping time and tracking
We use safe trackable shipping methods to ship parcels ,below is estimated delivery time for different countries :
Asian countries 7-10 days .
European countries 7-15 days .
United States 10-15 days .
American countries 15-25 days .
Brazil 15-45 days .
Warranty time and service
Customer service working hours:Beijing 9:30-18:30
Ship orders within 48 hours (except weekends)
The warranty period of the router is 1 year, and the warranty period of other products is 3 months
FAQ:
Q:Outdoor range do not reach 3KM
A:wifi speed is affected by many factors, such as local network, buildings, mountains, trees, railways, weather, etc.
Q:Pairing failed
A:Please Pick up the slave AP ,press "reset" button to adjust the number on the led screen(The number of the slave AP remains the same as the number of the master AP, that is, the pairing is successful)
Q:Product does not turn on
A:Please change the other POE Power and RJ45 Lan cable to try
Q:How to log in WEB UI
A:Master AP :Please fixed ip :192.168.255.20 ,Open the browser to seach 192.168.255.101 to log in web ui
A:Slave AP :Please fixed ip :192.168.255.20 ,Open the browser to seach 192.168.255.201 to log in web ui
Q:How to modily the wifi name and wifi passwork
A:Log in web ui to setiing