• High Memory Frequency :Enjoy lightning-fast data transfer speeds with a memory frequency of 2666MHz.

Features:

• It is widely compatible with Generation 10/11/12 CPUs of Intel platforms.

• KingBank Intel Black HeatsinkGaming Memory uses a 0.8mm metal heatsink in a neat style.

  Available at multiple channels for use, this series of memory modules give you a higher capacity

  to run your computer.

  
  

• This memory module is available at a frequency of 2666MHz, 3200MHz and 3600MHz. And 3600MHz

  XMP support Intel XMP2.0 one-click overclocking and are compatible with Intel platforms.

  
  

• Note: If you choose (16GB 3600 XMP Intel), the actual frequency during use will be subject to the

  motherboard of your computer. Enable the XMP profile to 3600MHz in Bios or it will be running at the

  default 3200MHz. To successfully enable XMP profile, make sure firstthat your CPU supports memory

  overclocking and then enter BIOS to enable the XMP profile through one click.

  
  

• Before purchase, check out if your motherboard and CPU support our products with the stated frequency

  versions. If not, the memory module will run at the default frequency of your motherboard or CPU.

Specifications:

${34}Ferquency: 2666MHz/3200MHz/3600MHz (XMP)

${37}Module spec:DDR4 288 pin UP2

${40}Capacity:8GB/16GB

${43}Heatsink material:Aluminum alloy

${46}Product size:136mm × 38mm × 7mm(± 0.2mm

Confirm before purchase

1. Choose specifications, and you will get 1 piece of the memory module with the correspondingly stated

frequency value.

2. It can perfectly adapt to the Intel platform.

3. Only 16GB 3600 XMP Intel is XMP Heatsink Ram,everything else is non XMP

Attention:

Compatibility: Take note of the notch displays on DDR3 and DDR4 RAMs. Higher frequencies of DDR4

memory modules are downward compatible, which means, for example, DDR4-2400 modules support

2133MHz, and DDR4-2666 support 2400MHz.

Specifications:Please check the configurations of your desktop computer or laptop, and see if it has extra

memory slots (since some laptops have only one memory slot), and if there is a maximum memory RAM

limit (since some computers support only up to 8GB). Consult your device manufacturer or check online

before purchase.

Accessories: This product contains only the memory stick. Screw drivers and other tool kit are not included.

Try to push the product from the back of the plastic support a bit for easier unboxing. Please turn to

professionals if device disassemblyis needed.

Installation: For memory modules larger than 4GB, please install them on a 64-bit operating system. For

computers with fast booting function, it is normal to reboot it with failure right after installation. Try to switch

slots to install the memory sticks and reboot your computer for 1~2 more times.

Warranty: Since our products have all undergone burn-in tests before they leave the factory, every one of

them may be spotted some fine marks upon, but neither performance nor after-sales services will be affected.

Please do not peel off the sticker on the product, which may void the warranty.

FAQ:

1. What if the computer prompts:

CPU or Memory changed / Please enter setup to configure your system / Press F1 to run setup / Press F2 to

default values and Continue.Then we recommend that under general circumstances, press F2 to restart.

2. My MSI motherboard prompts:

Memory modules were found on non-optimized memory slot. Please follow the instruction and move the

yellow-marked memory modules to the arrow-marked optimized memory slots.Then we recommend that you

remove the memory modules and replug them to the second and forth sloths near the CPU.

3. My Dell computer prompts:

The amount of system memory has changed. / If you did not change your memory... / To resolve this issue,

try to reseat the memory.Then we recommend that you click on the Continue button on the bottom right.

4. My HP computer prompts:

POST Configuration Change Prompts / 2E1-Memory Size Error / The system memory size is different from the

last startup / The most common reason is the removal of memory from the system board.Pressing ENTER will

record the new configuration. / If this message persists, verify that the memory modules are installed correctly.

Then we recommend that you press Enter to continue.

5. What if my computer fails to recognize the memory RAM?

Remove the memory sticks and reinstall them again. Try one stick at a time and boot the computer to see if

it works before installing the others. If it still fails to recognize, please contact a professional for help.