1.PLA Meta Filament Features & Parameter:

PLA Meta Product Parameter:

Wire diameter: 1.75MM
Tolerance: ±0.02MM
Printing temperature: 185-195℃
Bottom plate temperature: Glue is required when not heated, and glue is not required when heated at 50-65°C
Heating 60-80℃, no glue
Rally KGF: 9-12
Melt index: 8-12g/10min (190℃, 2.16kg)
Elongation at break: 35%
Density: 1.24 (g/cm³)
Printing speed: 50-100MM/s
Bubbles: 100% zero bubbles
Net weight: 1.1KG/roll,0.65KG/roll

PLA Meta Filament Features :

1. Environmentally friendly, non-toxic and biodegradable
2. High strength and rigidity
3. Soft and warm colors
3. Low shrinkage
5. 【Good toughness, not easy to break easily】: The toughness of PLA Meta is similar to the existing PLA+, it achieves high purity, low shrinkage and excellent layer adhesion, meeting your needs for higher quality functional parts printing projects
6. 【Printing temperature 180~200° (reduced and printing temperature range increased)】:
* Lower printing temperature means more energy saving and environmental protection, reducing printer loss.
* The wider printing temperature range means that customers have a larger operating space, and the printing failure rate caused by improper temperature settings is greatly reduced.
7. 【Not easy to draw】: The printing model effect is better than our current PLA and PLA+. The surface of the model has a good visual effect and is not easy to draw. This is especially noticeable when printing suspended models.
8. 【Good fluidity】: The printing fluency is better than the existing PLA and PLA+, which greatly improves the printing success rate

2.PLA Filament Features & Parameter:

PLA Product Parameter:

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 200-210℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 11-16
Melt index: 7-9g/10min
(190℃, 2.16Kg)
Elongation at break: 4%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=330M,
3.0MM(1KG)=110M

PLA Filament Features :

1. Environmentally friendly, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and strong rigidity;
Suitable for all types of FDM3D printers, suitable
Co-print crafts, artwork and industrial design samples
Grade

3.PLA PLUS Filament Features & Parameter:

Product Parameter:

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 205-215℃
Floor temperature: 70-80℃
Rally (KGF): 11-15
Melt index: 9-11g/10min
(190℃, 2.16kg)
Elongation at break: 45%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=330M,
3.0MM(1KG)=110M

PLA PLUS Filament Features :

1. Environmentally friendly, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and high rigidity;
5. Good toughness and not easy to be brittle;
6. 10 times higher toughness than PLA on the market
Printing is smooth, and the surface of the finished product is smoother and more delicate;
Suitable for all types of FDM3D printers, suitable
Co-print crafts, artwork, industrial design samples
And product models with higher toughness requirements.

4.PETG Filament Features & Parameter:

PETG Product Parameter:

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 230-240℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 8-14
Melt index: 6-11g/10min
(220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=320M,
3.0MM(1KG)=105M

PETG Filament Features:

1. Environmental protection and non-toxic;
2. Bright color;
3. Low shrinkage;
4. Good toughness, not easy to be brittle, good acid and alkali resistance, excellent
The toughness, weather resistance, and good adhesion.
5. Good dimensional stability, no cracks
And warping.
6. High transparency and good gloss.
Suitable for all types of FDM3D printers, suitable
Co-print all kinds of commonly used models, crafts, industry
Pieces, advertising words, etc.

5.SILK Filament Features & Parameter:

Product Parameter:

(1) Wire diameter: 1.75MM

(2) Tolerance: ±0.02MM

(3) Printing temperature: 205-215℃

(4) Bottom plate temperature: need to apply glue when not heating

Heating 60-80℃ without glue

(5) Printing speed: 30-60MM/s

(6) Air bubbles: 100% zero air bubbles

SILK Filament Features:

(1) Environmentally friendly, non-toxic and biodegradable;

(2) close to the silk effect;

(3) Low shrinkage

(4) 50 times higher toughness than PLA on the market

(5) The printing is smooth, and the surface of the finished product is smoother and more delicate

6.ABS Filament

Basic Information:

(1) Wire diameter: 1.75mm
(2) Tolerance: ±0.02MM
(3) Printing temperature: 250-260℃
(4) Bottom plate temperature: 80-120°C (better with thermal insulation cavity)
(5) Printing speed: 50-100MM/s
(6) Air bubbles: 100% zero air bubbles

7.ASA Filament Features & Parameter:

Product Parameter:

(1) Wire diameter: 1.75/3.0MM

(2) Tolerance: ± 0.02MM

(3) Printing temperature: 255-275 ℃

(4) Bottom plate temperature: 80-100 ℃

(5) Printing speed: 40-60MM/s

(6) Bubbles: 100% zero bubble

(7) Net weight: 0.65 KG/roll

ASA Filament Features:

1. Good weather resistance,

2. UV resistance is more than 10 times stronger than ABS.

Suitable for all models of FDM3D printers, suitable for printing outdoor weather and UV resistant products

8.Easy ABS Filament Features & Parameter:

Product Parameter:

1. Wire diameter: 1.75/3.0MM

2. Tolerance: ± 0.03MM

3. Printing temperature: 225-235 ℃

4. Bottom plate temperature: 60-70 ℃

5. Printing speed: 40-60MM/s

6. Bubbles: 100% zero bubble

7. Net weight: 1 KG/roll

Easy ABS Filament Features:

1. When printing, there is no need for an insulation box, and an open printer can be used

2. The shrinkage rate is low, and the printed model does not warp or crack. Note: Printing models with a bottom surface of more than 10 square centimeters can increase the bottom
plate temperature to 80-90 degrees.

3. Extremely low odor during printing

4. Consumables do not need to be dried and are less affected by humidity

5. Balanced physical properties, high strength, and good toughness