Description

Hot Sales DALY 16S 60V BMS 20A 30A 40A 50A 60A With Balance Function For 18650 Lithium Battery Pack Electric Bike Scooter

Feature

Model: DL16S ( 3.7V Rated Li-ION Battery ; not for 3.2V Rated LiFePO4)
Common Version : charging and discharging use same wire/port, BMS have P-, B- ;
Separate Version : charging and discharging use different wires/ports, BMS have P-, B- and C- ;

1. DL16S 60V 20A/ 30A /40A/ 50A /60A 80A 100A 120A 150A bms is used for 16series 59.2V 67.2V battery pack.
◆We can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer etc.
◆The main functions are: over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection etc..
◆According to the customer request we can develop PCM in different sizes and structures.
◆BMS manufactured by high quality Mos and IC imported . Keep your battery long cycle serivce life time.

2. Advantage

◆ The 16S is equipped with a mechanical temperature sensor, which can well protect the battery such as overcharge and discharge resuling in temperature increasing, effectively improving the safety of battery use, and solving potential safety issue caused by thermal runaway of batteries.
◆Use top quality (A-level) protective integrated circuit IC, from the solution of Seiko of Japan. IC itself has power balancing function. The circuit is simple and reliable.
◆Strong load ability, constant discharge current 15A / 20A /30A /40A /50A/ 60A, , use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help cooling.
◆Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable.Long time short circuit of the load won't affect the PCB and the battery.Temperature protection during charging and discharging.
◆Extreme low power consumption. The consumption of the whole device is less than 50uA.
◆PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.