CreatBot F430

THE PROFESSIONAL

FLAGSHIP 3D PRINTER

SUITABLE FOR MULTIPLE GRADES OF MATERIALSd printer

Nozzle Temperature Up To 420 ℃

F430 equiped with the 4th generation 1.75mm dual extruders and hotends. The left extruder equipped with 260°C hotend, It is able to print with PLA, ABS, PC, Nylon, Carbon fiber, Flexible, etc. The right extruder 420°C hotend is made of martensite steel, which is able to print high performance materials. The dual hotend is replaceable, which provide more possibility on your application.

High Precision & High Speed

We exclusively research and develop the extruder feeding system and guide rail, which support high-speed printing. Its printing accuracy can reach high to 0.04mm,and it allows to extrude filament steady without block.

Fully Enclosed+Hot Chamber 70°C

Fully enclosed chamber can block all external interfernce and reduce noise.
Hot chamber device provide constant room temperature 70°C,which is able to prevent prints
from warping and deform.

Outage Restore & Filament Detection

The printer will automatically memorize the current position and save print data. Lower the platform and withdraw filament when power off suddenly. It will continue to print from the last stopped point after power on. No trace!

The printer will avoid invalid printing by stoping print and warning when filament runs out.

HEPA Air Filter

The air filter system can adsorb impurities and gases that generated by printing special filament like ABS, Nylon, PC, more safe and environmental protection which is more suitable for house, school, office space.

Aviation aluminum platform + automatic leveling

The printer is equipped with a heatless aviation aluminum platform with a surface flatness of 0.02mm. The surface of the platform can be attached with PEI special 3D printing film and Buildtak film. Most materials can be squeezed and adhere well to the bed.

Auto leveling sensor, through the Z axis intelligent compensation table height in the printing process to achieve fully automatic leveling