EDUP 20W High Power Amplifier 2.4Ghz WiFi Signel Booster Long Range Wi-fi Repeater Strong Signal 20 Watt Wifi Extender For Drone
Description
If you need wholesale, please contact customer service
EDUP High Power Strong Signal 20 watt wifi amplifier wireless signal booster
Model: EP-AB009
Features:
1.Brand new and high quality.
2. Low-noise receive gain 2.5dB .
3. Led status: Green (transmit) / Red(receive) / Change TX with RX( mix red with green)
4. High Gain, High Value, High Performance.
5. Wide Working Voltage 30—54V.
6. Plug-and-play, Easy installation, no driver needed.
7. Ideal for increase the 2400-2500 MHz frequency devices. Adopt Time Division uplex ( TDD )
8. Increase the effective range and coverage area of your Wi-Fi network.
9. Maximum output power of 20000mW by the Booster.
10. The amplified wireless signal may even penetrate complex environments with many walls and obstacles.
11. Ideal for use with 2.4GHz Wireless LANs, Support 802.11b, 802.11g, 802.11n (2.4Ghz mode only).
Specifications：
1. Frequency: 2400-2500 MHz.
2. Operation Mode: Bi-directional, half-duplex, Auto-Switching via carrier sensing.
3. ultra low power consumption: 620mA@Pout 36dBm 48V
4. Input Power:8dBm (Min.)-26dBm (Max.).
5. output Power 9~ 43 dBm.
6. EVM: 4%@36dBm 802.l l g 54Mbps OFDM 64QAM BW 20MHz
7. Output Power: 20000mW/43dBm nominal for 802.11b/11Mbps.
8. Connector: SMA Receptacle, 50 ohm.
9. Transmit Gain: 17dB±1 nominal.
10. Receiver Gain: 20dB±1
11. Receive Noise Figure: 2.5 dBm nominal.
12. Operating Temperature: -40 to 70 degree.
13. Operating Humidity: Up to 95% relative humidity.
14. Material: Cast Aluminum.
15. Size:225mm ×12lmmx24mm
16. Product Weight：190 g
17. Package Weight: 1000g
Using Precautions：
1.Make sure all power supply to the booster and the AP/Router unit be disconnected before removing or changing antenna.
2.When finishing connecting the booster and the AP/Router, restore power supply first to the booster and then to AP/Router subsequently.
3.Waterproof, lightning protection equipment should be attached to outdoor antenna.
4. Keep away from heat and keep ventilated.
5. Please comply with local regulations of electromagnetic radiation.
Notice:
1. Power supply requires 12V /5A current.
2. If the output power is greater than 5W or above, it is recommended to enhance heat dissipation, such as increasing heat sinks or adding fans.
3. When connecting, you must screw the antenna first, then connect the upper and front -end faithful equipment, and finally supply power.
Note: Color AB009 does not come with a power supply.
Color AB009 with power does come with a power supply.
Package list:
AB009 Signal Amplifier / AB009 Signal Amplifier with Power Supply
Shipping and Returns:
Shipping is available from China
Warranty:
Products ordered from China come with a 75-day money-back guarantee.
Related Products
EDUP Booster WiFi Dual 4W Channel Signal Repeater Extender Dual 2.4GHz Channel Signal Booster Amplifier High Power for Drone
WiFi Repeater WiFi Extender 300Mbps Amplifier WiFi Booster Wi Fi Signal 802.11N Long Range Wireless Wi-Fi Repeater Access Point
