Description：

This is the cheapest main unit of Digiprog III with OBD2 cable, software version is V4.94. With the use of the new Digiprog III, the odometer adjustment is a breeze. Intelligent accessories and extensive manuals are enclosed. This is the cheapest but useful odometer correction tool.

Top 4 Reasons to Get This Main Unit of V4.94 Digiprog3:

1. Latest software Version: V4.94

2. Supported Multi-Languages:Deutsch, English, Espanol, French, Portuguese, Italiano,Turkish, Nederlands.

3. There are only main unit and obd2, st01 and st04cable inside the package,lighter and easier to pass custom house.

4. Cheapest price

Notice:

1.If you want to upgrade your digiprog 3, need to return the main unit for upgrading，please do not update online by yourself.

2.The Link is Digiprog3 OBD Version

3.The link digiprog3 with FTDI FT232BL&93C46 Chip. (FTDI version is more qualified.)

4. The password is "1" . After you type "1" and then choose mark " √ ". Then you could work with it at once!

5.It can not connect to the computer when you use it. Otherwise it would have the Blue-Screen problem.

Function：

speedometer, engine control units, operating hours counter, keys, memory error, motorcycles, etc.DIGIPROG III Machine with full software Include

With the use of the new DIGIPROG III the odometer adjustment is a breeze. Intelligent accessories and extensive manuals are enclosed.

Features:

The Digiprog 3 Tachojustiergerat is the leading system for setting and programming digital speedometer.

The Digiprog 3 is the system, with modern hardware and latest software tachometer and speedometer repair adjustment for everyone in the simplest way possible.

You can use the Digiprog 3 for all speedometer, and engine control units, operating hours counter, keys, memory error, motorcycles, etc. easily programmed.

You get the unit of course with all the necessary cables as well as an image and textual manual.

Other features:

Service interval adjustments and settings

Assyst processing

Fault memory read-erase

EEPROM programmer

Integrated PC communication

DIGIPROG III main board display:

Best Quality New Original CPU Display:

Digiprog 3 How to use ？

1.Turn off your engine and locate the "Function" button on the front of DigiProg III Mileage correction tool

2.Press and hold the "Function" button while turning the engine on. DigiProg III Mileage correction tool will now enter calibration mode.

3.Press the "Function" button repeatedly to scroll through the options until you come to "Auto."

4.Press and hold the switch until "-" is displayed. Release the switch when this appears. "Unit" will now appear on the display.

5.Wait until "Cal" appears on the display followed by zeroes, then drive your automobile until one mile clicks over on DigiProg III Mileage correction tool

6.Stop the car and then press and release the "Function" button. The mileage is now set.

Important Tips for Using Digiprog 3:

1. DO connect the Eeprom to the ST01 or ST04 before you connect to Digiprog3, which will avoid Electro static feedback (ESD).

2. Never solder the connections whilst the lead is connected to the programmer, which will damage DigiProg3.

3. DO keep your DigiProg3 in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned completely, as the solvent will damage the clips.

Digiprog 3 Menu:

1. EEPROM Menu

The first option on the main menu is the Eeprom menu. Reading, writing and saving Eeprom information is all done using this menu. A more detailed guide to using this menu follows later on in the introduction.

2. CAR/TRUCK Menu

This is the menu you will use for correcting and reprogramming vehicles. Manufacturers are set out in alphabetical order and models of vehicles are set out in a simple sub-menu format.

3. Motorcycle Menu

This menu is the same as the CAR/TRUCK menu but is used for reprogramming motorcycles.

4. Special Functions Menu

The special functions menu is for use only by official DigiProg dealers.

5. Setup Menu

This menu is where settings on your DigiProg can be changed. Language, password, brightness, volume, and the time/date can all be set and changed in this menu. You can also change whether your machine is working in kilometres or miles.

Using the EEPROM Menu:

On some of the vehicles you will come across, an 8pin Eeprom chip will be used to store the vehicle data. These chips hold vital information from the vehicle such as ignition and immobiliser codes. Loss of this information could result in anything from minor faults, to major faults involving the vehicle not starting and having to be taken to the main dealer. This is why it is very important to read and save the original information from the Eeprom before programming, this way if any errors do occur ,you can always return to the point you started.

The process of reading and saving this information is very simple. The Eeprom chip itself will have a mask number printed across the top of it, for example a widely used chip is a 93C46. You can connect the chip to your DigiProg3 by using adaptor ST01 or ST04. Most chips are surface mount eeproms which will use ST01, but the larger DIL chips will use ST04.

V4.94 Add Model List:

For A-u-di:

-A3 new version

For For F-o-rd :

-F150 24C16

-Falcon 24c02

For M-e-r-cedes:

-W176 new version

-W204 new version Diag

-W212 new version Diag

For O-p-el:

-Insignia new version

-Astra new version

V4.93 Digiprog 3 Odometer Programmer:

For A-u-d-i:

A3 Diag new version

A6 Diag new version

A8 Diag new version

For M-e-r-cedes:

R 172 Diag new version

R 231 Diag new version

W 212 Diag new version

For F-o-rd:

K-uga Transit

For V-W:

Amarok P-o-lo J-o-hnson