Cooling Fan For PS5 Vertical Stand Base

1. This product is a new type of intelligent multifunctional base, which can be installed in the P-5 console to dissipate the heat dissipation of the console, and it can be used normally by using special functions
2. Cooling fan: There are three high-speed fan bases at the back, which can speed up the internal air circulation and the console can dissipate heat.
Fan gear switch: you can turn the fan on and off, and adjust the wind power. When you press the switch, you can change the working status of the fan, namely: fast gear→medium speed gear→slow gear→turn off the cycle); fan gear indicator: "red/orange/green" indicator, used for indicator light To indicate the gear wind speed of the three fans "fast/medium/slow"
3. When the handle is charging, the orange breathing light on the handle will emit an orange light. When the breathing light on the handle is off, it means that the P-5 controller is fully charged.

Note: If you unplug the handle when charging the P-5 controller, it will reach about 80% or higher and then charge, it may not be charged because the controller has a battery protection function. It will not continue to charge until the handle battery level is below 80%, it will continue to charge

Product parameters:
Input voltage/current: DC 5V/3.0A (equipped with a dedicated cable);
Charging output voltage/current: DC 5.1V 600mA*2;
USB1/USB2 output: DC 5V 700mA~1000mA *2 (If there is no controller charging, the maximum output port of each USB is 1000mA, if two P-5 controllers are charged at the same time, the maximum output of each USB port is 700mA );
Built-in three cooling fans, the maximum fan speed:

Fast gear: 5500±1100r/min
Mid-range: 4500±900r/min
Slow gear: 3500±700 r/min

Controller charging time: about 4H-4.5H.
Product size: 246*194*40mm.
Product material: ABS.
Accessories include: 1*USB to Type-C charging cable, 1*base fixing screws.