Advantages of OT100 Engine Oil Tester

1. LCD display to tell you the test result.
2.Long probe designed for Motor vehicle,no need to take oil outside

Using Instruction

1.Open the hood and find the dipstick
2.Press the power button to turn on the turbine oil detector.
3.Pull out the engine dipstick and put the probe into the dipstick hole
4.Click the button switches to turbine oil detection status
5.Wait for 10 seconds for to show the test results,click the the button to clear the measurement results

Notice: Do not use it immediately after driving. The oil temperature should belower than 60 degrees during testing. Otherwise,the probe will broken.

Measurement Results Explanation

1. below 30%,high water content, it is recommended to replace the engine oil.
2. between 30%-80%,your car engine oil content some water,but still able to work.
3. above 80%,your engine oil is in good condition.

Package

1 * Engine Oil Tester (or with 4pcs battery)
1 * packing box