Description
2 in 1 Wireless Electric Pet Dog Fence 4 Working Modes Dog Training Collars Waterproof Rechargeable Pet Electric Collar Support dropshipping, wholesale
Product description:
The intelligent 2-in-1 electronic wireless fence training dog is a new product in the pet electronic product market. It has a novel appearance and comfortable hand feeling. It is worth mentioning that it integrates the dog device and the wireless electronic fence in one operation, and the operation is simple. Convenient, not only can better protect your pet's safety, but also allow pets to get better training within a limited range.
Main Features:
1. 2 in 1 function; LED display, pet wireless fence & remote control sound vibration shock trainer.
2. The LED displays 5 different control radius distances;
30 files = 30 meters, 60 files = 60 meters, 90 files = 90 meters, 150 files = 150 meters, 300 files = 300 meters
3. In wireless fence mode:
a. The transmitter and receiver do not need to use the code, and the signal can be normally operated after being turned on;
b. One transmitter supports multi-collar receiver
4. Remote dog training mode:
a. For code usage, you can control three dogs at the same time, 001 for the first dog, 002 for the second dog, and 003 for the third dog.
b. Three functions: sound warning, vibration warning, static warning;
c. Each function can be adjusted from 1-6 files
5. Reflective with fluorescent TPU to improve night safety;
6. The transmitter and receiver are rechargeable, and the receiver is waterproof;
Notice:
1. Fence working mode: sound for 5 seconds, sound and electric shock work for 6 seconds at the same time, electric shock for 5 seconds, sound for 5 seconds, sound electric shock for 6 seconds, electric shock for 5 seconds, there is always sound behind, return to the set distance and the receiver does not Work
2. If there are obstacles that will block the signal, use it in an open place
- transmitter should be above 1 meter, and there should be no obstacles between the transmitter and the receiver.
15m is when the receiver exceeds the range of 15m, it will be shocked. Sometimes it will be hindered by the environment, resulting in the difference between the received signal and the actual situation.
Instructions to sync a receiver with remote controller:
- Turn the receiver on first, the red light is on. Turn on fence controller, push the
Mode button to show 001 (if display otherwise showing 30,60, etc.), push the
Mode button again till it shows 001. Then push and hold the MODE button AND
the power button of the receiver at the same time. The fence controller's display
and receiver's light will flash and then turns solid red. Release your fingers on
both units. At this point, the receiver and the fence box are matched on channel
001. Do the same for the 2nd ont 002 or 3rd collar on 003.
How to test:
- Turn on fence controller and receiver, and switch to Wireless Fence mode.
Select a range like 30 or any other higher ranges (60,90,150,300), with the
collar in hand, walk away from the fence controller. When you approach the limit
of the range, collar will beep and its red-light flash rapidly. This indicates the
collar is in warning zone. If you move away further, collar will discharge shocks
till you return to the warning and safe zone.
- When in remote dog trainer mode, press a SOUND, VIBRATION or SHOCK
button to test. Push the SHOCK button and check if the shock test kit lights up.
note:
When the receiver is low, the power signal light flashes. It indicates that the battery is insufficient to complete the charging as soon as possible.
(for 1 dog)Package Including:
Wireless Transmitter *1
Collar Receiver*1
Adjustable TPU Strap *1
5V/1A Charger*1
Metal Contact Probes* 4
Test Light*1
English Manual*1
Package:
A:1* For 1 dog/1*for 2 dog
B:only dog collar (without remote)
Support dropshipping, wholesale.........