MULTI PERFORMANCE
REMOTE CONTROL HELICOPTER
N+FUNCTION ,FEEL THE CHARM OF K200

• ONE TOUCH TAKEOFF AND LANDING

• LOW POWER ALARM

• AIR PRESSURE FIXED HEIGHT

• OPTICAL FLOW POSITIONING

• DEBUG MODE

• 2.4GHZ REMOTE CONTROL

• 6-AXIS GYROSCOPE 

• AILERONLESS DESIGN

• POWERFUL MOTOR

• MODULAR BATTERY

• CHARGING BY USB

• LONG-LASTION USE FOR 16 MINUTES

FLIGHT CONTROL SYSTEM
3V is suitable for DSM receiver
5C is suitable for FUTABA (S-BUS)receiver

Precautions for frequency matching operation of external receiver: the remote controller must be in four axis mode
of fixed wingh mode with conventional layout,and cannot have mixed control parameters.By default,channels 5 is
the optical flow switch .It is recommended to removed the main propeller and unplug the motor plug before
frequency alignment,so as to prevent the reverse channel from causing the aircraft to self transmit and fail to fly.

AIR PRESSURE FIXED HEIGHT
The aerodynamic principle is applied to designthe blades to provide strong power andself-stability,
sensing the surrounding environmentand guaranteeing stable hovering of the aircraftin outdoor flight.

OPTICAL FLOWPOSITIONING
Optical flow positioning mode toggle switch.Optical flow positioning works best whenflying in a strong light, clear pattern, lowwind environment, and maintaining a heightof about 1.5 meters.The strong reflection, transparency, unclearlines, disordered lines and flying on thewater surface will affect the effect of opticalflow positioning

HOVERDEBUG MODE
WHEN THE AIRCRAFT IS YAWING,YOU CAN ADJUSTTHE AIRCRAFT TO THE BEST HOVERING CONDITIONTHROUGH THE DEBUG MODE

CARBON BRUSH MOTOR
Use 050 carbon brush motor with heat sink protection,make the motor life longer.

HOLLOW CUP TAIL MOTOR
The tail motor uses 1020 hollow cup motor with detachable plug connection ,which is convernient for customers to replace.

LONG-LASTING USEFOR 16 MINUTES
Standard 7.4V 600mah 25C high-power Battery,sustainable use of 16 minutes. Easy to removeand install modular battery design which caneasily and quickly replace the batteryno withoutremoving the case

CHARGING BY USB
REMOTE CONTROL HELICOPTER

FOUR-CHANNELDESIGN
With 6-axis gyroscope, low-voltage alarm,large and small rudder conversion, air pressure fixedheight, optical flow positioning function, very stableflight, so that the product is easier to control,more suitable for novice operation.

ONE TOUCH TAKEOFF AND LANDING
REMOTE CONTROL HELICOPTER

UPGRADE TO 80-100MLONG-DISTANCEREMOTE CONTROL
Upgrade to 2.4G high-frequency signal and80-100m long-distance remote control,
making the control still stable and sensitive.

2.4GHZ REMOTE CONTROLLER
INTRODUCTION OF LEFT AND RIGHT HAND REMOTE CONTROLFUNCTION
LEFT HAND THROTTLE

1. ANTENNA

2. POWER LED

3. LONG PRESS DEBUG MODE

4. RUDDER CONVERSION,CHANGING BUTTON

5. OPTICAL FLOW SWITCH

6. A KEY TAKE-OFFA KEY LANDING

7. THROTTLE/DIRECTION JOYSTICK

8. AILERON/LIFTING JOYSTICK

9. THROTTLE TRIM KEYS LONG PRESS DOWN
   AND TURN ONISLEFT AND RIGHT HAND
   CONTROLCONVERSION

10.  DIRECTION TRIM

11.  LIFTING ADJUSTMENT KEYS

12.  AILERON FINE-TUNING

13. EMERGENCY STOP

14. CALIBRATE THE GYROSCOPE BY TURNINGBOTH ROCKER ARMS TO THE LOWER LEFT
    AT THE SAME TIME
    MOVE THE JOYSTICKINWARD AT THE SAMETIME TO UNLOCK THE AIRCRAFT.ANDOUTWARD AT THE SAME TIME TO SHUT
    DOWN THE AIRCRAFT.

15. POWER SWITCH

1. ANTENNA

2. POWER LED

3. LONG PRESS DEBUG MODE

4. RUDDER CONVERSIONCHANGING BUTTON

5. OPTICAL FLOW SWITCH

6. A KEY TAKEOFFA KEY LANDING

7. LIFT/DIRECTION JOYSTICK

8. THROTTLE/AILERON JOYSTICK

9. LIFTING ADJUSTMENT KEYS LONG PRESSDOWN AND TURN ONIS LEFT AND RIGHT
   HAND CONTROL CONVERSION

10. DIRECTION TRIM

11. THROTTLE TRIM KEYS

12.  AILERON FINE-TUNING

13. EMERGENCY STOP

14. CALIBRATE THE GYROSCOPE BY TURNING14
    BOTH ROCKER ARMS TO THE LOWER LEFT
    AT THE SAME TIME
    MOVE THE JOYSTICK INWARD AT THE SAME
    TIME TO UNLOCK THE AIRCRAFT,AND
    OUTWARD AT THE SAME TIME TO SHUT
    DOWN THE AIRCRAFT.

15. POWER SWITCH