Description

PLEASE NOTE:

If you have a wireless device for the storage box, please pay attention to the options when placing your order.

Product description

Latest design wireless DMX512 receiver have a built-in rechargeable battery and the battery is renewable. After a full battery charge time about
2 .5hours,, sustainable work about 16 hours. Users also can use the product while charging.

Specification:
2.4G wireless DMX512 R/T
7 groups ID code settable, User can use 7 groups individual wireless net without any interfere.
Input voltage: 5VDC 500mA MIN
Communication distance: 800M (visible distance)
Max transmitting power rate: 20dBm
Receiver Sensitivity: -94dBm
CPU: 32-bit ARM Core
Modulation: GFSK
DMX Signal Interface: RS485
Operating temperature: -40 ~ 85 °C,Storage Temperature: -65 ~ 150 °C
Ambient Relative Humidity: 5 to 95% (non-condensing)
Automatic Reboot Trigger: Built-in WDT (watchdog timer)

Operating manual
1. Press momentary switch above the side led indicator to indicate ID setting
2. Press again to set IC,to the color ID desired, adding 1 each time you press the switch will advance the color ID code.
3. Working condition: LED constant lit up:No DMX or wireless signal. Red LED flash:Transmitting Green LED flash:receiving

Establishing Communication:
1. Power on DMX512 wireless received board first and then following to power up the transmitted boards.
2. Press "Key" button to set same ID value of transmitted board and received board. Please use different ID value if you need use more than 1 group wireless universals at same time in same place.
3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flash till received corrected same ID value, LED flash more fast once DMX data more fast.

FAQ

Q : Can I use this with microphones ? Can I use to make the microphones wireless ?

A : No....this is for wireless DMX control of lights not audio .

Q : Does it have a 5 pin adapter for connecting to the DMX port on a lighting console?

A : It is a 3-Pin. If you need 5-Pin, you can contact SZWIYXE customer service .

Q : How many DMX addresses can be sent thru one transmitter and one receiver?

A : there are 7 channels for the SZWIYXE and they are colored red green purple blue and so on. The transmitter needs to match the color using on all receivers.

Q : Have receiver buld-in battery?

A : YES