JW-XR182 Specification As Below

Product Description

XR182 is a WiFi6 repeater with OLED smart screen. Innovative OLED screen design,Compared with traditional repeaters, users are more simple and intuitive to set up and use. Xiaobai can also get started easily, and he knows the working of his repeater like the back of his hand. It is suitable for scenarios with incomplete routing coverage in large flats, villas, duplex buildings, and corporate offices.

Specification:

●Brand: COMFAST
●Model: XR182
●Colour: White
●Operating mode ：Repeater / Router / AP
●Chipset:MT7621A+MT7905D+MT7975D , 128MB DDR2 / 16MB FLASH
●Antenna: 4*2dBi high-gain Omnidirectional antenna
●Wireless Standard：IEEE802.11a/b/g/n/ac/ax standard
●RF Parameters:Transmit Power:200mW(23dBm)
●Acceptance Sensitivity: -96dBm
●Working Frequency: 802.11b/g/n: 2.412GHz- 2 472GHz ;802.11ax/ac/an/a : 5.180GHz-5.825GHz
●Transmission Rate:2.4GHz : 574Mbps ;5.8GHz : 1201Mbps
●Physical interface : 1*10/100/1000Mbps WAN/LAN RJ45 Ethernet port；
●Button：1*RESET/WPS Button ;
●Power :100-240V,56/60Hz

WiFi Expansion

Eliminating dead spots of wireless signals

Features

●OLED screen display, the working status is clear at a glance, the equipment is easier to use, and the usability is stronger;

●WIFI supports 802.11ax (WiFi6), and supports 802.11 ac (WiFi5) downwards,b/g/n(WiFi4);

●1800Mbps dual-band, stronger anti-interference, high speed, more compatible with WiFi6 home routing;

●4 antenna signal enhancement, signal coverage and wall penetration are significantly improved;

●The antenna can be rotated flexibly, and the user can adjust the angle of the antenna to adjust the signal transmission and reception;

●Support WiFi to wired, can be connected to TV, computer, etc. to connect with wired and stable work;

●Scientific heat dissipation design, the device supports 24h stable work without disconnection, avoiding overheating and aging of components;

WiFi6 repeater, support 1800Mbps dual band

XR182 supports a new generation of WiFi6 standard, supports 2.4&5.8GHz dual-band, includes WiFi6 OFDMA, BSS coloring, TWT technology, 1024QAM, WP A3 security encryption and many other performance advantages, the wireless rate can reach 1800Mbps, user experience Significant upgrade.

WPA3 Wireless Alliance Security Certification

Upgraded from 128-bit encryption to 192-bit encryption

Enhanced 4 antennas to improve signal coverage and coverage depth

Factors such as walls, obstacles, and co-channel signal interference all weaken the WiFi signal to varying degrees. The XR182 is equipped with an enhanced version of 4 antennas, which has a wider range of signal transmission and reception and is more stable.

Multimodal application

XR182 supports AP, repeater, and routing modes. Users can set different modes to meet the needs of different scenarios, and the application is more flexible. For example, when the WiFi signal is amplified, choose the repeater mode; when using an analog router, you can choose the routing mode; if the repeater is too far from the main route, you can choose the AP mode.

Product Application Scenarios

XR182 is suitable for scenarios such as duplex buildings, large flats, villas, and offices where large-area routers are not fully covered.

repeater 6

wifi ax repeater

wi 6 repeater

wifi 6 extenders

wifi 6 signal

wifi signal 6

wifi 6 repeater 3000

wifi 6 repeater 5ghz 1800

wifi 6 repetor

wifi 6 repeater 5ghz 1 900

wifi 6 amplifier 400mpbs

wifi 6 range extenders ;

wifi extended range

wifi extender 6

wifi range boosters

wifi repeat 5g

wi 6 repeater

grass wall backdrop