UeeVii CPE453 Wireless Wifi Repeater CPE Lang Range Extender 300Mbps 5.8Ghz Outdoor AP Router Bridge 3KM Antenna Repeater CPE
Description
Why choose UeeVii CPE453 remote wireless bridge?
UeeVii CPE453 is a high-performance enterprise-class outdoor wireless digital bridge that supports 802.11ac technology. The WiFi bridge works in 5.8G wireless frequency band and is equipped with 14dBi dual intensifier antenna. The wireless transmission rate between the two bridges can reach 450Mbps, and the wired speed of the Ethernet port can reach 100Mbps. It has the characteristics of long transmission distance, strong penetration ability and strong anti-interference ability. It focuses on achieving point-to-point and point-to-multipoint outdoor coverage and applications. It is very suitable for internet expansion and monitoring scope expansion of garages, barns, stores, docks, etc.
5.8G Powerful Wireless Transmission Capability
Built-in dual-polarized 14dBi high gain directional antenna and the circuit design with high power and high reception sensitivity greatly enhances the distance of wireless transmission and improves the performance and stability of wireless transmission.
The transmission speed between 2 wireless WiFi bridges max is 450Mbps, but the highest wired network speed that can be achieved max is 100Mbps via RJ45 port. To achieve the wireless bridge function, one needs to act as a slave bridge and the other one as a master bridge.
3KM Working Distance
High performance transmission wireless bridge, which can automatically adjust power to adapt to environmental changes, can ensure smooth video regardless of ultra short distance, and the actual application distance should be less than 3KM (barrier free). Trees will not block the transmission speed of the point-to-point Internet wireless bridge, and are suitable for warehouses, barns, stores or garages near houses.
Pairing Simple and Efficient
Point to point wireless bridge without the need for network professional knowledge, without computer operation, easy to dial code and adjust the main and slave devices' digital tube to the same value to complete point-to-point, point to multipoint (within 8 points) matching work.
Cost-effective Hardware Configuration：Internet bridge adoption MTK's enterprise-class master chip, industrial-grade circuit design, supports IEEE802.11a/n/ac protocol and can provide stable wireless access speed and 10/100Mbps Ethernet exchange processing speed.
Easy to Install
3km wireless bridge has small appearance vogue, installation is a simple, flexible wall hanging, a variety of installations, such as suction a top without affecting the original design, on the basis of greatly reduce the construction difficulty of construction personnel, improve the construction efficiency.
Outdoor IP65 Level Weatherproof
Outdoor wireless bridge has excellent anti-high and low-temperature design, fully protects user network data in the extreme environment, real-time, long-term, stable, and efficient transmission, enhance user experience.
Indicator Lights & Digital Tube
You can know the pairing status, signal strength status, and power status of the wireless bridge through the indicator lights; know the current configuration number through the digital tube, and switch other numbers through the "RST" button.
24V PoE Power Supply
CPE453 point to point bridge supports 24V PoE power supply, and the PoE power adapter is included in the package; use the network cable as the power cable to connect the PoE port of the PoE power adapter and the LAN/PoE of the wireless bridge to supply power; 12V 1A DC power supply is not included in the package, PoE power supply is recommended.
Master/Slave Toggle Button
Master bridge or the slave bridge mode of the wireless bridge can be switched by the M/S button; In point-to-point applications, one of the bridges is used as the master bridge, and the other bridge is used as the slave bridge to achieve the wireless transfer function. UeeVii wireless bridge will be pre-paired with 2 bridges, you can connect other devices to use.
Pillar Installation
Place the CPE to the selected position and adjust the CPE front panel orientation to be approximately the same as the selected direction, then use the ties to fix the CPE, the bracket is not included in the package. Recommended UeeVii Universal Bracket (ASIN: B09NLLG8MZ).
Lane Monitoring Application
Display your courtyard camera, garage camera, and driveway camera images in the monitoring room wirelessly, without digging and burying lines, destroying the road, and saving costs.
Elevator Monitoring Application
Using a wireless bridge to transmit monitoring signals in elevator monitoring can effectively avoid cable damage and obtain stable monitoring images. Wireless bridges are especially important in large projects, where they can be quickly deployed and easily dismantled for reuse.
Network Extension Application
Extend the network in the house to your barn, garage, church, warehouse, even neighbor's house through wireless bridge signal transmission. No need to install a new modem and pay for it every month, saving you money.
Ensure the user's network security at all times
The VAP signal of the CPE bridge kit is all advanced WPA-PSK&WPA2-PSK encryption strategy, and the bridge signal wireless terminal can not search. VAP signals support SSID hiding, protect users' networks from hackers' attacks, and ensure users' data security.
Multiple use methods (point to point & point to Multipoint)
UeeVii CPE453 has a 100M network interface. The power supply mode is flexible, supporting 24V PoE network cable power supply and 12V 1A DC local power supply. Based on 5.8G powerful wireless transmission capability and built-in dual-polarized 14dBi high-gain directional antenna, it has high performance, high gain, high reception sensitivity, high bandwidth and other characteristics, and is widely used in short-range video transmission, data transmission, wide-area monitoring, etc. You can choose different use methods:
Wide Range Of Applications
UeeVii CPE453 wireless bridge is designed to solve the problem of network transmission. It is applicable to any situation that requires network transmission. It can realize point-to-point and point-to-multipoint outdoor coverage and application. It can extend your home network to the second building, and is very suitable for the expansion of the internet and monitoring range of garages, barns, neighbors, stores, docks, etc.
Package List:
2 * CPE-453 Wireless Bridge
2 * POE Adapter (24V)
2 * Network Cable
2 * Metal Hoop
1 * User Manual
Related Products
2pcs CF-E113A 3KM Long Range Outdoor CPE 5GHz 300Mbps Wireless Repeater Extender Access Point AP WiFi Bridge Client Router
2pcs 300Mbps Outdoor Wireless Bridge 5.8GHz 3KM WIFI Router Extender Access Point CPE For Elevator Monitoring Project CF-E113A
