Surpass Hobby LED programming card for RC car 25A/35A/45A/60A/80A/120A/150A brushless ESC electronic speed controller programme

Note:Surpass Hobby LED programming card for Surpass Hobby brand brushless ESC （25A/35A/45A/60A/80A/120A/150A ESC electronic speed controller programme）,Not compatible with other brands of ESC

Brand: Surpass Hobby
Size:61*48*6mm
weight:20g
Suitable for:25A/35A/45A/60A/80A/120A ESC

Programme card appearance description:

1：Low Voltage Cut-Off:The function is mainly to prevent the lithium battery pack
from over discharging. When using lithium battery pack, please set the suitable
value for low-voltage protection as your like.WARNING: Never use the default value
“Non-protection” for lithium battery! 3.1V、2.9V、2.7V、Non-Protection
（default value 3.1V）。
2：3 start modes (Also called “Punch”) from “soft”to “very aggressive” （default
value Medium）
3：Maximum brake force: （25A、45A、60A）50%，25%，75%，100%（default value 50%），
（80A、120A）25%，50%，75%，100%（default value 25%）。
4：Maximum reverse force:25%，50%，75%，100%（default value 25%）
5：Neutral range: 9%(narrow)，6%(Normal)，12%(Wide)（default value 9%）
programme card Method：
1. Connect BEC wires with the programmer then turn on the ESC.（80A、120A press the
keys to be not put）
2. The Green LED flashes for 2 times then LED off, that is, the connecting program card
with ESC is successful, and the Red LED on presents the current value of that item.
Otherwise, the connecting is failed.
3. Please press the Key“↓” to select different programs
4. Please press the Key“→” to select different value of the current program
5. Please press the Key “Program” to confirm above selections, the Green LED on
immediately and has gone out within 5 seconds, that is, this process is successful.
6. Please press the Key“Reset” to reset the factory setting.

Notes:
Please allow slight dimension difference due to different manual measurement.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!