OVER 100,000 PRODUCTS ON THIS SITE AND WE ARE ADDING MORE!!!

FREE SHIPPING TO ANYWHERE IN THE WORLD ON MOST PRODUCTS!!!

Super PDR Car Body Repair Tool Pops A Dent Fix Slide Hammer Dent Puller Herramienta Auto Dent Remove Repair Kit

(No reviews yet) Write a Review

Description

Description

My friend, welcome to our store. Please consult me before placing an order, maybe you can get a discount! If you need other models of this product, please contact me and I will send you a link to the purchased product! For more detailed information, please contact me: Mobile:+86 15973186480 Whatsapp/WeChat:+86 15973186480 :)

About us!

Super PDR was specializing in the research and development of various paintless dent repair tools and automotive dent repair
technology.

Through continuous technical improvement and product upgrades, our products are now 100% non-destructive car paint, and the
success rate of dent repair far exceeds other products.

Our products has strict production process management and perfect quality, but also obtained a lot of research and development
patents.

We are the pioneers of pdr tools and we serviced for millions people round of world.

Product Show

Super PDR car body repair tool pops a dent Fix Slide Hammer dent puller herramienta Auto Dent Remove Repair Kit

Brand: Super PDR

Model: MPT-TK0111EU 1 set pulling bridge 1 pc glue gun 1 pc slide hammer 37 pcs tabs 1 pc reflector board 1 pc tool bag 11 pcs glue sticks 1 pc yellow scraper 1 pc empty bottle for alcohol 1 pc instruction 1 pc dust cloth 1 pc aluminum hammer 1 pc pump wedge 1 pc small red dent puller 1 pc rubber hammer 1 pc green dent lifter 5 pcs white tap down pen

Material:	Aluminum+Plastic	Brand Name:	Super PDR
Service:	OEM&ODM	Warrany:	12 months
MOQ:	1 pc	Used for:	Car dent repair tools
Pakcage:	Carton	Ship delivery time:	7-10 days(by air)

Product Advantages

Our products have 4 outstanding Advantages:

1,Low cost 2,For all cars 3,Repair efficiently 4,Original paint protected

How to use this paint-less dent repair kits? 1.Clean the dent with a clean wet cloth; 2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; 3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue); 5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter); 6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; 7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen; 8. Clean the repaired place with a clean wet cloth.