Strip Light:
Light Strip type: 5050

Length: 5meter/16.4ft per roll(10m kit=2 rolls 5m tapes,15m kit=3 rolls 5m strip and 20m kit=4 rolls 5m

strip)                    

LED quantity: 30LED/M

Waterproof rating: Waterproof and Non waterproof both are available                                   

Width:10mm

Work temperature: -20~60 degree centigrade

RF 24Key Remote:
Input : 12V DC
Color: 16 colors
Brightness adjustable
5 light pattern: Static/Flash/Strobe/Fade-change/RGB Smooth-change

You can control the light though it has some obstacles,no need to point to the receiver any more.

Power supply:
Output: 12V
Input: 100-240VAC, 50/60Hz, 3A  for 5M and 10M strip kit,5A for 15M and 20M strip kit
DC Connector: 5.5 x 2.5mm (outer diameter x inner diameter)

APP Features:
Color: 16 Miillion of color
Adjustable temperature
DIY allows you create custom colors,modes and speed
Brightness control: From 1% to 100%
Sound volume: From 1% to 100%
Speed: From 1% to 100%
Sync with music and sounds & Timer Mode
1 app can be used for multi strip lights; 1 account can be used on multi phones; Control multi strips at the same time.

Alexa Support Commands:
Alexa, turn{light name} on/off
Alexa, set {light name} to 1%-100%
Alexa, dim/brighten {light name}
Alexa, set {light name} to red...
Alexa, change the {light name} to the color blue...
Alexa, set {light name} the to daylight

Tips:
1. The connect must be in towards to the arrows before you plug in the power supply.
2. When you use the remote controller, you should take aim the IR accepter, otherwise it can't work well.

3. Don't left them on the spool when you testing them more than 2-3 mins.They need to dissipating heat.

4. Clean the surface before stick on the strip.

5. Please don't stick the lights to metal surface that conductive. It may cause a short-circuit on the strip light.

Package included
5M 5050 RGB LED Strip

1 x WiFi Signal receiver
1 x 24key/44keys Control board (not including battery)
1 x 12V ac/dc power adapter

1 x User Manual