[name] APA pre filter PF-128 pipe diameter (Note: This product does not fit the pump and filter material)

Commodity characteristics

1 the acrylic material is refined, the barrel integrated design, more durable.

2 of the transparent shell, filtering effect can be seen clearly, filter cleaning at a glance.

3 when used in conjunction with other external filters, it can reduce the other external filter cleaning cycle, most of the foreign material was filtered out.

4 easy installation and good filtration effect.

5 equipped with two kinds of specifications in and out of water connector, suitable for a variety of filters. (12/16,16/22)

6 new and improved models, the water inlet nozzle adopts the design of a 90 degree angle, improve the water easily broken fault.

7 suitable for all kinds of sea water aquarium

[methods of use]

With other external filter used as a pre filter

Firstly, according to the actual situation of various filter material filter installed, the water inlet pipe outside the filter in the appropriate position cut, the pipeline is connected to one side of the aquarium access the inlet (bottom), will be connected to one side of the filter pipe access the product outlet (top), (Law: the interface connecting nut to the inside. The water pipe set into and out of the water in the joint, the nut to screw until the hose clamp. Be careful not to be too hard to break the joint.

Two. Use other pumps.

A: according to the actual situation select the appropriate pump (recommended range of 100-2000L pump), and configured to filter, the pump is connected to the hose, and put the pump into the tank, the water pump outlet pipe connected to the water inlet (bottom), with a pipe connected to the outlet (top), and the water pipes connected to the aquarium.

B: according to the actual situation select the appropriate pump (recommended range of 100-2000L pump), and configured to filter, inlet and outlet connected respectively with two pump hose, the outlet directly into the aquarium, water inlet connected to the outlet of this product (top), also with a tube connected to the inlet (bottom). And the other side into the aquarium bottom side of the filter and the first pipe filled with water, electricity.

[note] [note]

1 regular observation of internal blockage of filter material, regular cleaning.

2 water inlet and outlet pipes you can choose 12 or 16 mm diameter hose.

3 installation process do not force too much, resulting in tap water split or break.

[warm reminder]

This product in and out of the water connector in connection with the hose do not force too much, otherwise it is easy to break or fracture, resulting in the filter can not be used properly.

[product specification]

Capacity: 1500ml

Filter capacity: 1000ml

Diameter: 145mm. high: 285mm

Package size: 290*157*153mm