【Parking Monitoring】
When a collision is detected, the front and rear cameras instantly activate and begin recording, monitoring the car while parked to prevent a hit-and-run. The continuous power supply is required for 24-hour parking monitoring through a hardwire kit (optional). Within 30 seconds of detecting a collision or vibration, the camera will immediately turn on and begin recording a lock-in video.

【Super Night Vision】
The dash camera utilize excellent high-performance sensors and WDR technology enhancements to enable the camera to operate in low-light conditions at night. With an aperture of F / 1.8, six glass lenses carefully trimming exposure, and a 170-degree ultra-wide-angle lens, the camera provides a wide direction and dynamic range to ensure the final image's sharpness and night image quality.

【Wide Dynamic Range (WDR)】

WDR technology can achieve very perfect video and image quality, regardless of whether the outside light is too bright or too dark.

【G-Sensor】
When the camera's built-in G sensor detects a violent shake or collision, the current video is locked to ensure that critical footage is recorded and that the locked video is protected from being overwritten as evidence of an emergency.

【Loop Recording】
When storage becomes full; Loop Recording automatically overwrites the oldest file and records over it. When the G-sensor is engaged, the dash cam front and rear automatically lock the current footage to prevent it from being overwritten in the case of a violent shake/collision, protecting critical footage. MicroSD cards with UHS speed class U1 Class 10 or higher are supported (TF Card Not Included).

【Support Max 256GB Card】

The dashcam accepts high-capacity micro SD memory cards up to 128GB (Not Included), providing additional video storage. It captures everything of the wonderful trip or scenery at any time and from any location.

【Connection of 24h Parking Monitor Kit】

Use the 24h parking monitor kit to not occupy the cigarette lighter interface.

First, connect the negative pole(black line) of the buck line to the ground wire(GND-) of the car fuse box;

Secondly, connect the positive pole(yellow line) of the buck line to the BAT interface(BAT+) of the car fuse box;

Finally,connect the red line of the buck line to the ACC interface of the car fuse box.