Description

Description

<<<2024 new version:After the diagnostic software is downloaded, you can perform offline diagnostics without connecting to wifi

MUCAR VO6 CAR SCANNER - Real Full System Diagnosis + 28+ Life-time Free Resets + TPMS Functions Automotive Tools Diagnostic Scanner Free Update

Be Professional With Professional Car Diagnostic Scanner For All Cars

MUCAR VO6 OBD2 scanner is the 2022 newest upgraded diagnostic scan tool based on Android 10.0 system, which can realize a comprehensive full system standard OBD/EOBD protocol diagnostics and 28+ maintenance reset services. And more importantly, compared with expensive scan tool over USD 1000, MUCAR VO6 scan tool comes with advanced vehicle diagnostic solutions at a lower cost, including bi-directional control and ecu coding. You can effectively perform basic and advanced maintenance on modern cars and can handle almost all car maintenance situations you can think of. Ideal for repair business to target new revenue stream. ( NO EXTRA FEE )
1. OE-Level Full Systems & Subsystems Diagnostics: MUCAR VO6 OBD2 scanner provides lifetime free diagnoses for the ENTIRE car system, allows you deeply access and diagnose all vehicle ECU systems and subsystems including Body, Chassis, Powertrain, Fuel system, Light system, etc. Such as ABS/SRS/ECM/TCM/BCM/TPMS and so on; and most of the subsystems, such as Immobilizer, Air Conditioning, Headlamp Leveling, Audio Systems, Windows, Door Motors. Fast Scan and Read/Clear fault codes in seconds, effectively turn off the warning light. Do not miss any system failures, maintain the health of the vehicle, thereby maintaining the life safety of every family member.

2. 28 Reset Services: MUCAR VO6 scan tool for all vehicles has a lifetime free 28+ reset functions that help restore/reset the ECU modules related in seconds after repair and can be upgraded with One-Touch, including OIL(Oil Maintenance Light Reset), SAS(Steering Angle Reset), Injector Coding, IMMO(Anti-theft Matching), DPF Regeneration, EGR Adaption, ABS Bleeding, AdBlue, ETS(Throttle Matching), TPMS Reset, EPB Reset, Tire Reset, AFS Headlamp Reset, Sunroof Initialization, BMS(Battery Reset), Seat Calibration, SRS(Airbag Reset), A/F Reset, Gearbox Reset, Transport Mode, Windows Calibration, Language Change, Suspension Reset, ODO Reset, NOX Sensor Reset, Stop/Start Reset, Coolant Bleeding, Gear Reset(AT Learning).

3. Optional Special Functions: MUCAR VO6 OBD2 reader supports Bi-directional Control, ECU Coding and other advanced functions, Only 49.95/year/make, such as Chrysler, Volvo, Dodge, etc. Bidirectional Control helps activate or test mechanical components. ECU Coding helps reflash hidden functions and helps initialize, match and reprogram adaptive data for new components (ECU/modules) after making repairs or replacements.

4. Auto VIN Scan: Automatically identifies your car quickly. Shorten the diagnostic time and help you solve the problem accurately, can quickly scan the vehicle identification number.

5. Lifetime Free Update: Lifetime free one-click updates via WiFi. Load the latest version, bug fixes, new vehicle models coverage, newly added parameters, and functionality on your scanner.

6. Wider Vehicle Coverage: MUCAR VO6 automotive scan tool conducts a comprehensive system-wide diagnosis for most OBDII compliant vehicle after 1996 for American, European, Australia, Asian car models, upgrade car makes up to 2021 models, including cars, SUVs, minvans, 12v light-duty trucks. ***If you are not sure the compatibility for desired functions on your car, please ask questions via message or QA, and also you can check the compatibility by yourself at MUCAR brand official website - COVERAGE - search VO6 - search your car brand & year.

7. Full OBDII Special Services: Complete obd2 functions included, such as Read/Clear Codes, Freeze Frame Datas, Live Datas, O2 Sensor Test, EVAP Systems, I/M Readiness, On-board Monitor, Vehicle Information.

8. WiFi & Bluetooth Connection: MUCAR VO6 car code reader diagnostic is equipped with WiFi (2.4Ghz & 5Ghz), with a linear transmission distance of 50 M, which can be used/downloaded normally. It is equipped with Bluetooth 5.1. It can be used smoothly without jamming, throw away the wires, and hold the car scanner to check and diagnose the whole car.

9. Powerful Datas Collection & Processing: MUCAR VO6 code scanner supports 4 in 1 live data monitoring for most of vehicle systems and sevurity parameters, data saves, reads, screenshot, screen recording, and prints health reports. The health report which takes all system error codes, interprets them, and actually shows you possible causes and potential fixes. You can share and print the diagnosis report via PC. MUCAR support is top-notch so you won’t be on your own if there’s ever an issue with your new OBD2 scanner.

10. Outstanding Operating System: MUCAR VO6 car diagnostic tool is equipped with powerful Android 10.0 system, Quad-core 1.8GHz processor, 3150mAH long-life battery. Built-in 2G RAM (random access memory), 32G ROM (read only memory) for more vehicle programs. There is no longer the anxiety of low memory.

11. Sensitive Large screen: 6-inch LED capacitive touchscreen, 1024×600 resolution. IU-level design page, the visual effect is clearer and more beautiful.

12. 20 Languages Support: English, French, German, Italian, Spanish Portuguese, Japanese, Russian, Polish, Dutch, Hungarian, Slovak, Greek, Slovenian, Korean, Chinese Traditional, Swedish, Turkish, Czech, Indonesian

13. Online Maintenance Resources: Operating skills, DTC help, automotive technical manuals, service cases, online support, remote tech support and operating videos. Incoming tutorial videos of different functions will be gradually updated on the scanner. No matter for those who know how to do repair or not, it allows you to grasp and understand car breakdown problems more quickly.

14. A Carry Bag Included: A protective carry bag is attached to the package. It is not only convenient to carry, but also provides excellent protection for the product.

Support All System Diagnostic:

With superior all systems diagnoses, this multipurpose obd2 scanner can be used to read all available systems’ECU information to facilitate the vehicle diagnosis.The complete systems vary from different cars and they usually include engine, transmission, ABS, SRS, SAS, TPMS, EPB and chassis / body / electrical equipment system etc.
* Examinate your car like a professional mechanical technician
*Read DTCs from the vehicle’s all electronic control systems to locate problem areas, and offer solutions;
*Erase the codes easily after DTCs retrieving and certain repairs have been carried out and turn off fault Indicator lamp;
*Live data shows each sendor parameter item displayed in analog, text, waveform graph modes etc.;
*The active test used to access vehicle-specific subsystem and component tests.

Support 28 Reset Services Lfietime Free

1.Oil Lamp Reset Service

Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

2.EPB Electronic Park Brake Reset

It is important in the maintenance of electronic braking system's safety and efficiency.

3.BAT battery service

Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

4.DPF Diesel Particulate Filter Reset

Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

5.SAS Steering Angel Sensor Reset

Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

6.TPMS Tire Pressure Monitoring System Reset

Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

7.IMMO Matching

In order to prevent the car from being used by illegal keys, the IMMO matching function enables the anti-theft control system on the car to identify and authorize the remote key, so that the car can be opened and used normally. When the car changes the ignition switch key, ignition switch, integrated dashboard, engine control unit (ECU), body control module (BCM) and remote control battery, the IMMO matching is required.

8.ABS Bleeding

ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.

9.Sunroof Reset

The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

10.Suspension Reset

Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.

11.Gearbox (Transmission )Reset

Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.

12.AFS Headlamp Reset

'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.

13.Injector Coding

Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.

14.Throttle Adaptation

The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.

15.Gear Learning

The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

16.EGR Reset

Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.

17.A/F Reset

This function is applied to set or learn Air/Fuel ratio parameters.

18.Adblue Reset(Diesel Engine Exhaust Gas Filter)

After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.

19.Airbag Reset

This function resets the airbag data to clear the airbag collision fault indicator.

20.Coolant Bleeding

Use this function to activate the electronic water pump before venting the cooling system.

21.AT Learning

This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift

22.Language Change

This function is used to change the system language of the vehicle central control panel.

23.Nox Sensor Reset

Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.

24.ODO Reset

a) ODO reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage.
b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it
is necessary to do ODO reset after maintenance.

25.Stop/Start Reset

This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).

26.Seat Calibration

This function is applied to match the seats with memory function that are replaced and repaired.

27.Transport Mode

ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.

28.Windows Calibration

This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.

Support 20 Languages

English, French, German, Italian, Spanish Portuguese, Japanese, Russian, Polish, Dutch, Hungarian, Slovak, Greek, Slovenian, Korean, Chinese Traditional, Swedish, Turkish, Czech, Indonesian

Support 126+ Car Brands and 1000+ Vehicles

For America car models —— FORD,LINCOIN,GM,BUICK,CADILLAC,CHEVROLET,CHRYSLER,DODGE,JEEP,HM

For Europe car models —— BENZ,SMART,SPRINTER,BMW,VW,SKODA,AUDI,OPEL,LAMBORGHINI,PORSCHE,MAYBACH,EURO FORD,LANDROVER,DR,BENTLEYRollsRoyce,ROVER,MINI,VAUXHALL,FERRARI,FIAT,Abarth,LANCIA,Alfa,Romeo,Maserati,BUGATTI,PEUGEOTCITROEN,RENAULT,SAAB,VOLVO,OPEL,Dacia,SEAT;

For Malaysia car makes —— PERODUA(PERODUA), PROTON;

For Iran car makes ——IKCO, MVM, SAIPA;

For Australian car makes —— Austford, Holden ;

For India car makes ——TATA, MARUTI, MAHINDRA, India HM;

For Russia car makes—— GAZ, VAZ;

For Brazil car makes ——FIAT; GM;

For Asian car makes ——SAMSUNG,DAEWOO,SSANYYONG,HYUNDAI,KIA,HONDA,Acura,TOYOTA,SCION,LEXUS MAZDA,NISSAN,Infiniti,JPISUZU,TLISUZU,DAIHATSUSUZUKI,MITSUBISHI,SUBARU,CHANGCHENG,HUACHEN,ZHONGXING,JACTY,QIRUI_TY,ISUZU,JINLONG,CHANGAN,LIUWEI_TY,XINKAI,JPISUZU,ZHONGSHUN,HAOQING,HAFEI,XIALI,CHANGHE,ZHONGTAI,Kowloon,Brilliance,LIFAN,WEILI,FLYER,SSANGYONG,JIAO,WEILI,LUXGEN.BYD,CHERY.ZOTYE.etc.

Note:It can support about 126 car brands, the details page only lists some models, other models can consult the store customer service.

Support to ECU Coding

The Coding function is used to re-flash the vehicle control modules.It is used to reprogram adaptive data for vehicle control modules after repairs or replacements of vehicle parts;Provide solutions for the issues of Drivability, Fuel Efficiency, Power Loss, Fault Codes, Durability of Mechanical Parts etc.;Brake the limitations and restrictions; make full use of the car hidden features, like change the chimes on car, set how many times the one-touch signal flickers for one touch, remember settings for Start/Stop systems, and more.

Support Active Test (Actuation Test)

Uses the ThinkDiag App to test if the actuator is normal, without using the vehicle’s controls, to get a significant boost in effectiveness:
[ Turn on the radiator fan | Modulate the throttle | Open/close windows | Operate mirrors | Turn on/off the lights | Turn on/off the sound horn | Test door lock … ]

Warm Tips: The ECU coding and Active test need to pay extra $49.95/year/ brand.

Free Full OBDII Functions:

*-Read extensive current, pending and permanent codes in OBD system quickly

*-Clear detected fault codes and turn off the Check Engine Light efficiently

*-View graphical live data of vehicle's computer module(s) for easy analyses

*-View the vehicle's operating parameters at the moment a DTC is detected

*-Read I/M readiness status to have a vehicle inspected for state emissions compliance

*-Perform O2 sensor test to check fuel efficiency and vehicle emissions

*-Read the results of on-board diagnostic monitoring tests for specific components/systems

*-Retrieve the vehicle information of VIN, CINs, and CVNs completely

*-Perform the component Test by allowing initiating a leak test for the vehicle's EVAP system

4 IN 1 Scientific Data Management: Live Data Stream Graph & Record Data & Diagnosis Record Playback & Print Report

The professional vehicle scanner tool can scientific graph data, record data, play back data, freeze frame,and print reports.

In the real-time diagnosis process, important diagnosis information can be instantly stored in the memory, including reading of fault codes and frozen frames and real-time data streams.
After real-time diagnosis is completed, Diagnosis function record playback, the diagnosis information and process previously saved in the memory can be replayed to facilitate the analysis of various data information.
One-click generation of a diagnosis report after diagnosis will help users quickly solve problems, avoid blind maintenance, and save money/time.

One-Click WIFI Free Update Lifetime

1. Turn on the MUCAR VO6 scanner
2. Connect to WIFI
3. Click the upgrade button on the home page to achieve one-click upgrade

Reading Codes

Show the detailed description of the Diagnostic Trouble Code (DTCs)

Erasing Codes & Reset

Turns off Check Engine Light (MIL), clears codes and resets monitors.

Data Stream

Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

I/M Readiness Status

Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

Read Live Data Stream

Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

Print Via PC & Ready Support

The health report which takes all system error codes, interprets them, and actually shows you possible causes and potential fixes. You can share and print the diagnosis report via PC. Mucar support is top notch so you won’t be on your own if there’s ever an issue with your new OBD2 scanner.