Description
Micro 200 Pro Car Battery Tester Small Clip 12V For Garage Workshop Auto Mechanical Cars Inspection Tools Battery Testers
Support Multi-languages:(Please choose the correct languages to order)
4. Portuguese: English, French, Portuguese, Spanish, Italian, Polish.
Functions:
Battery Cranking Test, load test
Battery Charging Test, Ripple Test
Test results storage and review
Print test results and battery report on PC
Led Lighting Status: Good(Green) Weak(Yellow) Replace(Red)
For testing 12 volt batteries.(Car.Motorcycle)
For testing 12 and 24 volt charging systems (Car.Motorcycle.Truck)
Tips: Truck only could test the 24V system.not the 24v battery.
Check Battery Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating. Check Internal resistance value (m)
Features:
【A Must Tool For Car Owner】Professional battery tester applied for automobile. The measure range is 40-2000CCA . It covers all battery rating Standards such as CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB .Suitable for most types of 12V lead-acid batteries including Regular Floded,AGM,GEL and EFB etc.
Note:
For ensuring the accuracy of test results, please stop the engine more than one hour and turn off all electrical equipments in the car.
Questions & Answers:
A: No, it can only be powered by the tested battery.
Q: Can it Charge the Battery?
A: No, it will not charge any batteries, But it can detect the battery.
Q: Can it test the battery life?
A: Yes,it can test the State of Health,the State of Charge,the Internal Resistance and the Testing Conclusion .
Q: What batteries can it be used on?
A: It can test 12 volt lead-acid batteries with the CCA range (40-2000CCA)
Q: Why is the result of the MDXT600 test inaccurate?
A: Maybe the parameter you set is wrong. Please input the correct data from the battery label.
Q: Why nothing is displayed?
A: Please make sure your battery voltage is higher than 8V and The positive and negative clamp are connected correctly.
Q:What is CCA?
A:CCA: Cranking Amps Standard, effective starting current value at 0'C.