THERE HAVE TWO TYPES , FOR IOS AND FOR USB C PHONE TYPE ,PLZ MAKE SURE THE TYPE YOU WANT BEFORE YOU BUY ,THANKS

FOR IOS :
Product description:

1. Lighting conversion Ethernet adapter is a kind of Internet artifact specially developed to solve the usage data of iPhone/iPad/iPod Touch devices and WIFI interruption. Through the RJ45 interface, you can connect the iPhone/iPad/iPod Touch to the Internet to achieve Internet access.


2. Equipment parameters:
Working voltage: 3.3V-4.0V
Lighting working current: ≤100mA
RJ45 Ethernet interface: support 10/100 LAN routing network cable
charging current: 500mA-2100mA
The above relevant data is measured by the personnel of the company's development department. The actual current and transmission speed vary depending on the type of equipment and accessories


3. Compatibility
Compatible with iOS 9.1 and higher versions of Lighting interface iOS devices


4. Features
Using the RJ45 port, you can easily get the thrill of surfing the Internet without buffering,grabbing red packets without delay, and playing games without freezing;

Solve the problem that some iPhone devices cannot charge at the same time while using OTG accessories.


5. Matters needing attention
This adapter cannot dial-up to the Internet by itself, you need to provide IP automatically through the router device through the DHCP service.



FOR USB C PHONE
2 in 1 type-c 100M Ethernet +60W (PD charging)

2. Plug and play. This adapter does not require any software, drivers or complicated installation process. Portable and high-quality design can provide better heat dissipation. Special internal PCB anti-interference design, no need to worry about interrupting the signal.

3. Widely compatible with high-end mobile phones & laptops and tablets on the market;

4. Currently supported mobile phone models: Apple Xiaomi mate3, Xiaomi 6, Xiaomi 9, Xiaomi C9, Xiaomi 8, mate9, Honor 30, p30, p30pro, p20, p20pro, mate30, mate30pro, mate40, mate40pro, p40, mate10, mate10pro, p40pro, Samsung s8, s9, LG, v30 Lenovo S5GT