About Gifts

Please note that all gifts will be sent after you give us a positive review. Please contact the seller promptly after leaving five stars.

What is the difference between EU Version and Global Version ?

1.EU Version and Global Version support the same functions.
2.The EU Version is designed for European customers and only supports working in the European region ( including Russia and UK).
3.The Global Version has no IP restrictions and can be used worldwide.

How to order without EU VAT/TAX (European Clients Don't miss it )

European customers can choose China warehouse to place an order, we will ship from European warehouse, saving money and faster.

About Launch Global

We are LAUNCH Global Store with 12 years old store. Quality Assurance! 100% original products and best prices. We support wholesale and dropping order. Contact us for favorable price.

Fast Shipping from Oversea Warehouse:Spain/Poland/France/Czech/Russia/US

LAUNCH X431 PRO3S+ SmartLink HD 12V Car 24V Truck Heavy Duty OBDII Diagnostic Tool ECU Coding Active Test 31+ Reset Services

What should I do before using it for the first time?

Charging & Turning On
1. Plug one end of the included charging port of the tablet, and the other end to the power adaptor.
2. Connect the other end to the AC outlet to start charging. After the tablet is fully charged, unplug the power adaptor from the tablet.

Caution: Please use the included power adaptor to charge your tool. No responsibility can be assumed for any damage or loss caused as a result of using power adaptors other than the one supplied.

Note: If it is the first time you have used this tool or the tool remains idle for a long period of time, the tool could fail to turn on. Please charge the tool for a minimum of 5 minutes and attempt to turn on again.

How to change the system language?

The tool supports multiple system languages. To change the language of the tool, please do the following:

1. On the home screen, tap Settings -> System -> Language & input -> Languages.
2. Tap Add a language, and then choose the desired language from the list.
3. Tap and hold the desired language and drag it to the top of the screen and then release it, the system will change into the target language.

Product Profile

It inherits from LAUNCH’s advanced diagnosing technology and is characterized by covering a wide range of vehicles, featuring powerful functions, and providing precise test result.

Through simple wireless/wired communication between VCI (Vehicle Communication Interface) device and the display tablet, it can achieve full car and full system trouble diagnosis, which include Reading DTCs, Clearing DTCs, Reading Data Stream, Actuation Test and Special Functions.

Moreover, it also has the following other features: remote diagnosis, ADAS, repair data, vehicle coverage, software update, mall, diagnostic record, diagnostic feedback and toolbox.

Automatic Diagnosis

Through simple wireless communication between the tablet and VCI, you can quickly scan all available systems of the currently identified vehicle. Once the automatic detection is successfully performed, the system will directly output the scan result.

Actuation Test

This option is used to access vehicle-specific subsystem and component tests.
Available test vary by vehicle manufacturer, year, and model.

During the actuation test, the display tablet outputs commands to the ECU in order to drive the actuators, and then determines the integrity of the system or parts by reading the ECU data, or by monitoring the operation of the actuators,
such as switching an injector between two operating states.

SmartLink Super Remote Diagnostics

SmartLink is a newly developed powerful service system dedicated to remote vehicle diagnosis and service. In the SmartLink ecology system, if a technician (SmartLink C) does not have time to puzzle through a touch vehicle problem, he can seek a trusted second opinion or additional expertise on various vehicle issues from remote master technicians or repair shops (SmartLink B).

SmartLink B enables the shop owner to greatly increase customer’s retention and boost shop revenue by providing the professional technical assistance service.

Special Function

This module provides an easy dial to quickly access the most commonly performed service functions.

It offers coding, reset, relearn and more service functions, to help vehicles get back to functional status after repair or replacement. Available tests vary by vehicle manufacturer, year, and model.

Due to continuing improvements, the available service functions are subject to change at any time. To enjoy more service functions, you are suggested to check for updates on a regular basis.

DPF regeneration

This function can help remove PM (Particulate Matters) from the DPF filter by using combustion oxidation methods (such as high temperature heating combustion, fuel additive or catalyst reduce PM ignition combustion) to keep the performance of the filter stable.

Cylinder cut-off, compression test

This function can cut off certain cylinder when the engine is running to identify which one is working improperly. Users can judge whether certain cylinder is normal or not by separately cutting off certain cylinder and checking the working status of the engine.

Injector coding

This function can write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder, so as to control or correct the cylinder injection quantity accurately.

Urea drive (DEF)

This function can drive the urea pump to perform reverse pumping, compression, injection and other operations through the diagnostic scanner.

Flash data conversion

This function enables you to convert the backup data into standard format data such as .hex, .s19 and .bin etc.

Data optimization

This function enables you to optimize the vehicle power by revising vehicle data.

Nox sensor

NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in engine exhaust. If the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU.

X431 Remote Diagnostics

This module helps repair shops or mechanics to diagnose a remote vehicle, and launch instant messages, allowing for improved efficiency and faster repairs.

Software Update

This module enables you to update the diagnostic software & App and frequently used software.

Renew Subscription

If the software subscription is due or expires, tap Renewals to enter Mall to renew the subscription.

Diagnostic History

When a vehicle diagnosis is performed, the tablet records the detailed diagnostic information. The History function allows access to previously tested
vehicle records. Testing can be resumed from the previous operation without starting from scratch.

Diagnostic Feedback

This function allows you to send the feedback of your diagnostic problems to us for further analysis and troubleshooting.

VCI module (SmartLink C V2.0)

The SmartLink C V2.0 device features powerful functions and it can be applied in the following situations:

1). When as a VCI (Vehicle Communication Interface), it needs to work in conjunction with the Diagnose module of the tablet, which is used to obtain vehicle data, and then send it to the tablet for analysis wirelessly or via data cable.

2). When as a SmartLink C (Customer) dongle, it does not communicate with the tablet, but it needs to work together with the SmartLink module of the tablet. The tablet is mainly used to issue remote diagnostic requests, and the SmartLink C dongle is networked to receive and execute commands from the remote SmartLink B (Business).

3). When as a local J2534 PassThru device, it can be used in conjunction with the PC installed with OEM diagnostic software.

J2534 Reprogramming

Flash programming has become a common and profitable procedure in the repair and service of today’s vehicles. Reprogramming is often the only solution for problems ranging from driveability and loss of power to poor fuel economy and emissions related issues. SmartLink C V2.0 makes it easy. The SmartLink C V2.0 is a communication interface designed to support J2534 specifications for ECU reprogramming.

Except that the SmartLink C V2.0 can act as a VCI device and a SmartLink dongle, it also can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 reprogramming. In this case, the PC needs to install with the LAUNCH's J2534 tool, which can be downloaded from the official website at www.cnlaunch.com.

Technical Parameters

1. Display tablet
Operating system: Android
Memory: 4GB
Storage: 64GB
Screen: 10.1 inch capacitive touch screen with a resolution of 1280 x 800 pixels
Camera: Rear-facing 8.0MP camera
Connectivity: Wi-Fi (802.11a/b/g/n/ac)/Bluetooth/USB
Working temperature: 0℃ ~ 50℃
Storage temperature: -20℃ ~ 70℃

2. VCI module (SmartLink C V2.0)
Working voltage: DC 9~36V
Power consumption: ≤ 6W
Communication: Wireless/Wired connection
Size: 204mm x 110mm x 45mm
Working temperature: -10℃ ~ 50℃

Toolbox

This function includes the following add-on modules: Oscilloscope, Ignition Scope, Sensor Simulator, Multimeter, Battery Tester and Videoscope.

Each module consists of two parts: hardware and application. These applications cannot work properly on the tablet, which need to work with
the specific compatible hardware (sold separately).

Package List

Common accessories are same, but for different destinations, the accessories (such as diagnostic software, testing connectors) may vary. Please consult from the seller or check the package list supplied with this tool together.

1 x Display tablet
1 x VCI module
1 x Password envelope
1 x Diagnostic cable
3 x Power adaptors
1 x B-shaped terminal to Micro USB cable
1 x Type A to Micro USB cable
1 x Crossover cable
1 x Non-16pinadaptor cable kit for commercial
vehicles

Warranty

This warranty is expressly limited to persons who purchase LAUNCH® products for purposes of resale or use in the ordinary course of the buyer’s business.

LAUNCH®electronic product is warranted against defects in materials and workmanship for one year (12 months) from date of delivery to the user.

This warranty does not cover any part that has been abused, altered, used for a purpose other than for which it was intended, or used in a manner inconsistent with instructions regarding use.

The exclusive remedy for any automotive meter
found to be defective is repair or replacement, and LAUNCH shall not be liable for any consequential or incidental damages.

Final determination of defects shall be made by LAUNCH in accordance with stipulated procedures.