Description
Product Description
Features:
1.Operator Interface of 15 inch color LCD touch screen
2.Enclosed Tissue treatment system with no pollution of gas leakage, to meet requirement of environmental protection.
3.Mode of Sample processing: Sample not move, Reagent move.
4.It can avoid the risk of power failure of machine, or other mechanical failure.
5.Timing Mode: Finishing time of tissue processing any day in the week can be set
6.Function of Protection System of Power Failure. Once main power restored, the previous protocols is
automatically resumed and continue to work in order.
7.10 Set of Programmers stored in the system and can be set for purpose.
8.Special design of Reagent Station makes the liquid totally back-flow to avoid any mixture and to
extend using time of reagent.
9.Patented design of cassette holder makes reagent and samples thoroughly contact with each other,
it improves effection of tissue processing and reduce working time.
10.Dual Purpose of processing: one key switch normal processing motion and Rapid processing motion
11.Rapid Processing motion stirred in day time finished in 3 hours, Normal Processing Motion stirred
in the evening.
12.Device for Air pressure transfer: Formal air pressure transfer of several solenoid valves replaced
by one single mechanical structure replace formal in order to avoid high fault error.
13.Function for changing wax automatically:
14.Wax in No.1 Container wash into waste container, then, wax in NO.2 container goes into No.1 Container,then,No.3 goes into No.2,and so on
15.Function of over temperature protection occurred by accidental heating
16.Function for magnetic stirring which shorten time of tissue processing and make good processing effection.
17.Alarm and Screen display when finishing work.
18.Capacity of tissue processing: 400pcs cassette at most.
Bottle amount | 12. 1 - 9 for dehydration reagent, 14 - 16 for cleaning agent |
Nos of Reagent Station | 12 |
Tissue Processing Station | NO.1 to No.9 Station |
Washing Station | No.14 to No.16 Station |
No.14 to No.16 Station | 3(No.10,12 and 13) |
Nos of Working Station | 1 |
Capacity of Processing Station: | 9Liters |
Temp.of Processing Station: | Medium is the solvent: ≤45ºC Medium is the Wax: 58ºC-70ºC Operation pressure:<0.1Mpa Wax temperature :58ºC-70ºC Wax melt time not more than 3 hours |
Capacity of Reagent Station | 6L |
Power input | <1500VA+10% |
Time for immerse | 0 - 99 hours 59 minutes |
Working Voltage | 220VAC±10%,50/60HZ |
Time for Inflow Liquid | no more than 5Min |
Time for Exclude Liquid | no more than 5Min |
Stirring time | set randomly |
Interval time for Stirring | set randomly |
Operation mode | manual and automatic |