JAYO 3D Printer PLA/PLA Meta/PETG/SILK/PLA+/Wood/ Rainbow Filament 1.75mm 10 Rolls 3D Printing Materials for 3D Printer&3D Pen
Description
1.PLA Meta Filament Features & Parameter:
PLA Meta Product Parameter:
Wire diameter: 1.75MM
Tolerance: ±0.02MM
Printing temperature: 185-195℃
Bottom plate temperature: Glue is required when not heated, and glue is not required when heated at 50-65°C
Heating 60-80℃, no glue
Rally KGF: 9-12
Melt index: 8-12g/10min (190℃, 2.16kg)
Elongation at break: 35%
Density: 1.24 (g/cm³)
Printing speed: 50-100MM/s
Bubbles: 100% zero bubbles
Net weight: 1.1KG/roll,0.25KG/roll
2.PLA Filament Features & Parameter:
PLA Product Parameter:
Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 200-210℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 11-16
Melt index: 7-9g/10min
(190℃, 2.16Kg)
Elongation at break: 4%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=330M,
3.0MM(1KG)=110M
3.PLA PLUS Filament Features & Parameter:
Product Parameter:
Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 205-215℃
Floor temperature: 70-80℃
Rally (KGF): 11-15
Melt index: 9-11g/10min
(190℃, 2.16kg)
Elongation at break: 45%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=330M,
3.0MM(1KG)=110M
4.PETG Filament Features & Parameter:
PETG Product Parameter:
Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 230-240℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 8-14
Melt index: 6-11g/10min
(220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=320M,
3.0MM(1KG)=105M
5.SILK Filament Features & Parameter:
Product Parameter:
(1) Wire diameter: 1.75MM
(2) Tolerance: ±0.02MM
(3) Printing temperature: 205-215℃
(4) Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃ without glue
(5) Printing speed: 30-60MM/s
(6) Air bubbles: 100% zero air bubbles
6.ABS Filament
Basic Information:
(1) Wire diameter: 1.75mm
(2) Tolerance: ±0.02MM
(3) Printing temperature: 250-260℃
(4) Bottom plate temperature: 80-120°C (better with thermal insulation cavity)
(5) Printing speed: 50-100MM/s
(6) Air bubbles: 100% zero air bubbles
Special function:
(1) It has excellent impact strength and wear resistance;
(2) The chemical resistance, dyeing property, molding processing and mechanical processing effect are good;
(3) The support is easy to peel off;
(4) Applicable to equipment with heating device on the bottom plate
7.TPU Feature
Basic Information:
(1) Wire diameter: 1.75MM
(2) Tolerance: ±0.02MM
(3) Printing temperature: 205-230℃
(4) Bottom plate temperature: no heating required
(5) Printing speed: 20-40MM/s
(6) Air bubbles: 100% zero air bubbles
(7) Length: 1.75MM(0.5KG)=165M
Shipping
* You can check parcel tracking information through this ways:
1.https://www.17track.net
2.http://track.4px.com
3. Leave a message to us, then we will check the parcel information for you.
After Sale
*We offer a one-year warranty for electronic products , but damage caused by using non original brand filament or not following the instructions correctly is not covered by the warranty.
*Please provide us with the proof of video if products have any problem after receiving the parcel within 7 days, we will offer replacement or refund after confirming the problem.
Contact Us
*If satisfied with our product, please kindly leave us a positive feedback and 5 stars.
*If any questions, you may contact our customer service in 24 hours before negative feedback. We'll try our best to help you.
We look forward to cooperating with you next time!
Related Products
JAYO PLA /PETG/PLAMETA /SILK PLA Plus Filament 1.75mm PLA 3D Filament 1.1KG 10pcs/set 3D Printing Materials For FDM 3D Printer
