JAYO 3D Printer PLA//PETG/PLA PLUS/ASA/ Easy ABS Filament 1.75mm 10 Rolls 3D Printing Materials Non-toxic for 3D Printer&3D Pen
Description
1.PLA Filament Features & Parameter:
PLA Product Parameter:
Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 200-210℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 11-16
Melt index: 7-9g/10min
(190℃, 2.16Kg)
Elongation at break: 4%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=330M,
3.0MM(1KG)=110M
PLA Filament Features :
1. Environmentally friendly, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and strong rigidity;
Suitable for all types of FDM3D printers, suitable
Co-print crafts, artwork and industrial design samples
Grade
2.PLA PLUS Filament Features & Parameter:
Product Parameter:
Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 205-215℃
Floor temperature: 70-80℃
Rally (KGF): 11-15
Melt index: 9-11g/10min
(190℃, 2.16kg)
Elongation at break: 45%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=330M,
3.0MM(1KG)=110M
PLA PLUS Filament Features :
1. Environmentally friendly, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and high rigidity;
5. Good toughness and not easy to be brittle;
6. 10 times higher toughness than PLA on the market
Printing is smooth, and the surface of the finished product is smoother and more delicate;
Suitable for all types of FDM3D printers, suitable
Co-print crafts, artwork, industrial design samples
And product models with higher toughness requirements.
3.PETG Filament Features & Parameter:
PETG Product Parameter:
Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 230-240℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 8-14
Melt index: 6-11g/10min
(220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=320M,
3.0MM(1KG)=105M
PETG Filament Features:
1. Environmental protection and non-toxic;
2. Bright color;
3. Low shrinkage;
4. Good toughness, not easy to be brittle, good acid and alkali resistance, excellent
The toughness, weather resistance, and good adhesion.
5. Good dimensional stability, no cracks
And warping.
6. High transparency and good gloss.
Suitable for all types of FDM3D printers, suitable
Co-print all kinds of commonly used models, crafts, industry
Pieces, advertising words, etc.
4.ABS Filament
Basic Information:
(1) Wire diameter: 1.75mm
(2) Tolerance: ±0.02MM
(3) Printing temperature: 250-260℃
(4) Bottom plate temperature: 80-120°C (better with thermal insulation cavity)
(5) Printing speed: 50-100MM/s
(6) Air bubbles: 100% zero air bubbles
Special function:
(1) It has excellent impact strength and wear resistance;
(2) The chemical resistance, dyeing property, molding processing and mechanical processing effect are good;
(3) The support is easy to peel off;
(4) Applicable to equipment with heating device on the bottom plate
5.ASA Filament Features & Parameter:
Product Parameter:
(1) Wire diameter: 1.75/3.0MM
(2) Tolerance: ± 0.02MM
(3) Printing temperature: 255-275 ℃
(4) Bottom plate temperature: 80-100 ℃
(5) Printing speed: 40-60MM/s
(6) Bubbles: 100% zero bubble
(7) Net weight: 0.65 KG/roll
ASA Filament Features:
1. Good weather resistance,
2. UV resistance is more than 10 times stronger than ABS.
Suitable for all models of FDM3D printers, suitable for printing outdoor weather and UV resistant products
6.Easy ABS Filament Features & Parameter:
Product Parameter:
1. Wire diameter: 1.75/3.0MM
2. Tolerance: ± 0.03MM
3. Printing temperature: 225-235 ℃
4. Bottom plate temperature: 60-70 ℃
5. Printing speed: 40-60MM/s
6. Bubbles: 100% zero bubble
7. Net weight: 1 KG/roll
Easy ABS Filament Features:
1. When printing, there is no need for an insulation box, and an open printer can be used
2. The shrinkage rate is low, and the printed model does not warp or crack. Note: Printing models with a bottom surface of more than 10 square centimeters can increase the bottom
plate temperature to 80-90 degrees.
3. Extremely low odor during printing
4. Consumables do not need to be dried and are less affected by humidity
5. Balanced physical properties, high strength, and good toughness
Shipping
* You can check parcel tracking information through this ways:
1.https://www.17track.net
2.http://track.4px.com
3. Leave a message to us, then we will check the parcel information for you.
After Sale
*We offer a one-year warranty for electronic products , but damage caused by using non original brand filament or not following the instructions correctly is not covered by the warranty.
*Please provide us with the proof of video if products have any problem after receiving the parcel within 7 days, we will offer replacement or refund after confirming the problem.
Contact Us
*If satisfied with our product, please kindly leave us a positive feedback and 5 stars.
*If any questions, you may contact our customer service in 24 hours before negative feedback. We'll try our best to help you.
We look forward to cooperating with you next time!
Related Products
JAYO 3D Printer PLA/PLA Meta/PETG/SILK/PLA+/Wood/ Rainbow Filament 1.75mm 10 Rolls 3D Printing Materials for 3D Printer&3D Pen
JAYO PLA /PETG/PLAMETA /SILK PLA Plus Filament 1.75mm PLA 3D Filament 1.1KG 10pcs/set 3D Printing Materials For FDM 3D Printer
3Rolls PLA PETG ABS TPU Filament 3D Printing 1.75mm PLA Material Eco-Friendly Good Tougness for FDM 3D Printers 3d pen Filament
