Feature:

1. One RJ45 port and one single fiber SC optical port to realize the optical signal conversion between 10/100/1000base TX twisted pair

(Ethernet) and 1000base FX (optical fiber);

2. Compared with dual-fiber data transmission, core fiber can only use one way to complete signal transmission.

Modulus doubled;

3. Comply with IEEE802.3 10Base-T and IEEE802.3u 100Base-TX, 100Base-FX standards;

4. With 10M/100M/1000M adaptive capacity;

5. The Ethernet interface can be self-adapted for direct connection/crossover network cable connection;

6. Support full/half duplex mode;

7. Support IEEE802.3X duplex flow control and half-duplex back pressure flow control;

8. 1916 Byte supports large data frames (optional);

9. Built-in lightning protection circuit, which can greatly reduce the damage caused by lightning induction;

10. There are six LED indicators: Power, TX 100, TX Link/Act, FX 100, FX Link/Act, FDX/Col; easy to monitor

The status of the transceiver and determine the cause of the failure;

11. There are two power supply modes: external and internal: AC100～265V/DC5V switching power supply;

12. Working temperature: 0～50 degrees;

13. Storage temperature:-40 ~ 70 degrees;

14. Dimensions: 94mm×70mm×25mm

15. Packing: ESD packing, carton