Description
Specification:
Origin: Mainland China Model Name: Motorcycle Seat Heater Pad Special Features: Waterproof and Anti-slip Input voltage: DC12V Output power: 10W Product line length: 128cm/50.39inch Material: Top fabric: PVC leather Bottom composite fabric: microfibre + TPU + sponge + backing cloth Product use scope: can be installed in the motorbike, 12V electric car use Wiring method: red to the positive pole, black to the negative pole, ACC line connected to the door lock (connected to the reverse light does not light, only heat) Product power value: first gear (red): 100%, second gear (blue) 70%, third gear (green): 40% (the above data are obtained by the experiment, the specific value or due to voltage, environmental and other objective factors, such as the change of a slight fluctuation, for reference) Wiring instructions: please refer to the product manual Switch operation instructions: 1.power on / off: (open the power) long press the power switch, the switch itself will light up red, power on; (power off) long press the lighted power switch, the switch goes out, power off! 2.temperature adjustment: after turning on the power, red, blue and green alternately flashing quality control switch, long press 3 seconds to switch on, the switch lights up red, strobe for 5 minutes, the temperature in this state is set to the highest grade, 5 minutes after the automatic change to mid-range (blue light), each time you press the switch, high-grade (red) - mid-range (blue) - low-grade (green)
Note:
1 x Seat Cushion
1 x Power Cable 1 x Instruction Manual 3pcs x Ties
[relateproductdetail/]
|