This GPS HUD is suitable for all cars with USB port.

Please Noted:

1.GPS signals are not available in some place, such as underground garage. You'd better receive the GPS signal in an open air place.

2.If your car windshield glass is covered with a metal film, it may block the GPS signal.please don't buy this device.

(if you ordered by mistake, It is recommended to open your car window or sunroof during use).

Feature:

1.Display Function:Speed(KM/H, MPH), Compass, Light Sensor, GPS Signal, Setting Icon.

2.Light Senor: Automatic brightness;

3.Universal: Suitable for all vehicles, such as cars, pickup trucks, bus,etc. ;

4.Alarm Function: Overspeed reminder;

5.Compass: Show the current direction of your car.

6.Size: 80*45*12mm/ 3.15*1.77*0.47 inch

7.Power Supply: Car USB Port(Input Voltage: 5V).

8.GPS speedometer windshield projector, hud projector,GPS HUD.

How To Install:

Please connect the USB cable to your car's USB port. Switch on the hud, Start up your car, It will take about 1-3 minutes to search the GPS signal.

How to Adjust the Speed Unit from KM/H to MPH: Please click this link to see the video

https://video.aliexpress-media.com/play/4000129350412.mp4

How to Adjust the Speed Alarm Limited: Please click this link to find the video

https://video.aliexpress-media.com/play/4000129364935.mp4

Package Included:

1 x GPS Head up Display

1 x USB Cable

1 x Reflective Film

1 x Non-slip Mat

1 x Manual (in English)

FAQ:

1.How to Adjust the Speed Error?

Please follow these steps below:

-Long Press the button to enter into the setting interface;

-Adjust the number to 4 by moving the button to the right, and then press the button to save;

-The default speed is 100, you can adjust the number to change the speed.

For example,

-If the speed error is above 3, it can be set to 97;

-If the speed error is below 3, it can be set to 103.

2.How to adjust the speed unit to "MPH"?

-Long press the button, enter into the setting interface;

-Move the button to the right, adjust the number to "5";

-Short press the button, enter into the speed unit interface;

-Move the button to the right, adjust the unit to "MPH",short press the button to confirm it.