GERMA Universal Wireless 433 Mhz DC 3.6V-24V Remote Control Switch 433Mhz 1 CH RF Relay Receiver LED Light Controller DIY Kit

(No reviews yet) Write a Review

SKU:
UPC:
MPN:

$12.10

Current Stock:

Quantity:

Description

Description

Features:

·Wireless control LED lamp string, Christmas tree light string, light control switch

·Long range working voltage

·Ultra low power,High sensitive response

Specification:

Working voltage: DC 3.6V~24V

Maximum load: 2A

Static current: 3.6 mA ~ 5.5mA

Working frequency: 433MHz

Reception sensitivity: ≥ -107dBm

Output DC3.6V~DC24V

Size: 22.5 mm x 11mm x 8mm (length × width × high)

Mini size support coding format 1527 learning code

Input: DC3.6V~DC24V

Output: DC3.6V~DC24V

Modulation mode:ASK (superheterodyne)

Appearance size: 22.5mmx 11mm x 8mm (length × width × high)

Number of stored remote controls: ≤ 10

Working mode: Momentary, Toggle, Latching Mode

Learning style: Learning Button

Working temperature: -20 degrees 80 degrees

Package Include:

1Pcs * QA-R-010 Light Switch Receiver Module

Instruction:

About Working mode:

Momentary: Push the remote button , the relay connects, release the remote button , the relay dis-connects.

Toggle: Push once the remote button, the relay connects , push twice the remote button , the relay dis-connects .

Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.

Steps:

Clear Code: Press the learning button on the module 8 times continuously, and the light flashes seven times and then goes out.

Momentary Mode:Press Module learning button 1 time, the indicator light is always on, then press the remote control button, the indicator light flashes 3 times and then turns off , then the learning is successful; If the code is not successful , the indicator lights out of the learning state after 15 seconds .

Toggle Mode:Press the Module Learning button 2 times, the indicator light always turns on; then press the remote control button, the indicator lights flicker three times and then off, then the learning is successful; if the code has not been successful, the indicator lamp goes out of the study state after 15 seconds.

Latching Mode:Press the Module Learning button 3 times, the indicator light always turns on; and then press the buttons on the remote control , the indicator lights flicker three times and then off,then the learning is successful; if the code has not been successful, the indicator lamp goes out of the study state after 15 seconds.