OVER 100,000 PRODUCTS ON THIS SITE AND WE ARE ADDING MORE!!!

FREE SHIPPING TO ANYWHERE IN THE WORLD ON MOST PRODUCTS!!!

For VAG KKL Scanner Tool VAG-KKL 409 CH340 Chip for VAG-COM 409.1 OBD2 USB Interface for Vag 409 Diagnostic Cable

(No reviews yet) Write a Review

Description

Description

Purchase Note:

As CD is fragile, it's easy to broken during shipping. To avoid any inconvenience to you You can contact seller 1434086082@qq.com to get software directly or download software from this link firstly

This is CD download link:https://mega.nz/folder/DcwnmaqC#o_eJ95Qhc4FCo1MZWI17Uw

Description:

Name: For V-AGCOM 409 Cable with CH340 Chip

Primary Function:

USB For V-agCom interface cable

OBDII Plug: J1962 16-Pin Male (to Car)

Other Features:
1. Also supports ISO9141 protocol

2. No DC or alternate power supply needed, just connect to your car and computer

3. Work with most for Volks-wagen and for Au-di models sold worldwide from 1994 to current year

4. The CVFG-A11 cable can not work if your car uses a protocol bus system like For VPW, For PWM or For CAN-bus

Compatible Vehicles: For Volks-wagen, For Au-di, For skoda, For seat

1.For Audi Models:

-Compatible: A2/A3/A4 Cabriolet/A6/A8/S2/S3/TT

-Not Compatible: 80/100/200/A3(8P)/A4(B7)/A6(C6/4F)/A8/A8L(D3/4E)/Q7

2. For SEAT Models:

-Compatible: Alhambra / Altea / Arosa / Cordoba / Ibiza / Inca / Leon MK 1 / Leon MK 2 / Toledo

-Not Compatible: Altea (5P) / Leon (1P) / Toledo (5P)

3. For Skoda Models:

-Compatible: Fabia/Felicia/Octavia MK 1/Octavia MK 2/Superb

-Not Compatible: Octavia (1Z)

4.For V W Models:

-Compatible: Beetle/Bora/Caddy/Corrado/Golf MK2/Golf MK3/Golf MK4/Jetta MK3/Jetta MK4/Lupo/Passat MK3/Passat MK4/Polo MK3/Polo MK4/Touran/Touareg/Transporter T3/Transporter T4/Transporter T5.

-Not Compatible: Caddy (2K) / Golf MK5 (1K) / Golf Plus / Jetta MK5 (1K) / Passat MK5 (B6) / Passat MK6 (B6) / Phaeton/Touran (1T)

Please note: The compatible year of specific models cannot be determined!

Cable used to include a 4 way to switch to different ECUs access:
Position 1 = engine ECU (read / clear engine failure)
Position 2 = airbag ECU (read/remove airbag failure)
Position 3 ECU = ABS (read / erase fault code)
Position 4 = ESP ECU (read / clear fixed fault)

How to use:
1. Connect the plug cable to the computer / laptop
2. Install the cable driver (available on the CD)
3. Make any additional set of diagnostic software
For the diagnosis of V A G set the switch on the ECU
5. The OBD connector cable plug and connected with the car
6. Diagnostic software products used for connection

Packing list:

1pc x for V A G Cable (CH340 Chip)

1pc x CD Drive