Description
Fiber Optic Equipment Xpon GPON EPON ONU Router FTTH Giga Dual Band 2.4g 5g WIFI +CATV
1、Product Overview
ONU product is the terminal equipment of a series of xPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the
energy-saving of G.987.3 protocol,ONU is based on mature and stable and high cost-effectiveXPON technology which adopts
high-performance xPON REALTEK chipset and has high reliability, easy management,flexible configuration,robustness,good quality
service guarantee(Qos).
This ONU supports WIFI4 (IEEE802.11b/g/n) and WIFI5 (IEEE802.11ac) concurrently ,a WEB system provided simplifies the
configuration of the WIFI and connects to INTERNET conveniently for users.
ONU supports the G/E PON switching function automatically
ONU supports a RJ11 interface for VOIP applications
2、Product Features
△ comply fully with ITU-G.984.1/2/3/4 standard and G.987.3 protocol
△ support downlink 2.488 Gbits/s rate and uplink 1.244 Gbits/s rate
△ support bidirectional FEC and RS(255,239) FEC CODEC
△ support 32 TCONT and 32 GEMPORT
△ support AES128 decryption function of G.984 standard
△ support SBA and DBA dynamically broadband allocation
△ support the PLOAM function of G.984 standard
△ support Dying-Gasp check and report
△ support synchronous Ethernet
△ good interworking with the OLT from different manufacturers,such as HuaWei ,ZTE,Cortina etc
△ down-link LAN ports: 4*10/100/1000M with auto-negotiation
△ support the rogue ONU alarm function
△ Support VLAN function
△ operation mode: HGU
△ support IEEE802.11b/g/n and IEEE802.11ac standard for WIFI
△ antennas gain: 5DBi with external
△ support: 300Mbps PHY rate IEEE802.11n, 866Mbps PHY rate IEEE802.11ac
△ support multiply SSID
△ Multiple encryption methods:WFA、WPA、WPA2、WAPI
△ one port for VOIP,support SIP protocol optional
△ comply fully with IEEE802.3ah standard and CTC-3.0 specification
ONU product is the terminal equipment of a series of xPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the
energy-saving of G.987.3 protocol,ONU is based on mature and stable and high cost-effectiveXPON technology which adopts
high-performance xPON REALTEK chipset and has high reliability, easy management,flexible configuration,robustness,good quality
service guarantee(Qos).
This ONU supports WIFI4 (IEEE802.11b/g/n) and WIFI5 (IEEE802.11ac) concurrently ,a WEB system provided simplifies the
configuration of the WIFI and connects to INTERNET conveniently for users.
ONU supports the G/E PON switching function automatically
ONU supports a RJ11 interface for VOIP applications
2、Product Features
△ comply fully with ITU-G.984.1/2/3/4 standard and G.987.3 protocol
△ support downlink 2.488 Gbits/s rate and uplink 1.244 Gbits/s rate
△ support bidirectional FEC and RS(255,239) FEC CODEC
△ support 32 TCONT and 32 GEMPORT
△ support AES128 decryption function of G.984 standard
△ support SBA and DBA dynamically broadband allocation
△ support the PLOAM function of G.984 standard
△ support Dying-Gasp check and report
△ support synchronous Ethernet
△ good interworking with the OLT from different manufacturers,such as HuaWei ,ZTE,Cortina etc
△ down-link LAN ports: 4*10/100/1000M with auto-negotiation
△ support the rogue ONU alarm function
△ Support VLAN function
△ operation mode: HGU
△ support IEEE802.11b/g/n and IEEE802.11ac standard for WIFI
△ antennas gain: 5DBi with external
△ support: 300Mbps PHY rate IEEE802.11n, 866Mbps PHY rate IEEE802.11ac
△ support multiply SSID
△ Multiple encryption methods:WFA、WPA、WPA2、WAPI
△ one port for VOIP,support SIP protocol optional
△ comply fully with IEEE802.3ah standard and CTC-3.0 specification
Product name | Optical Network Unit(ONU) |
Product model | 2LAN+WIFI+CATV |
ports | 2LAN+ 1Fiber + 1RF |
wifi | 2.4GHz |
LAN | 4*10/100/1000M with auto-negotiation |
PPPOE BRIDGE | Support |
Firmware | English |
FIBER ports | 1 XPON interface,SC single mode single fiberRX 2.488 Gbits/s rate and TX 1.244 Gbits/s rate |
Wavelength | TX 1310nm,RX 1490nm |
Fiber connector | SC/UPC or SC/APC connector |
Sensitivity | -28 dBm (1490nm) |
DC power | 1input+12V 1A,footprint:DC0005 ø2.1MM |
Dimension(MM) | 185*125*32mm(mainframe) |
Basic Characteristics | |
Tech parameters | description |
Up-link interface (XPON use the GPON spec) | 1 GPON interface,SC single mode single fiber RX 2.488 Gbits/s rate and TX 1.244 Gbits/s rate Fiber type:SC/APC Optical power:0~4 dBm Sensitivity:-28 dBm safety: ONU authentication mechanism |
Wavelength(nm) | TX 1310nm,RX 1490nm |
Fiber connector | SC/UPC or SC/APC connector |
Down-link data interface | 4*10/100/1000M auto-negotiation Ethernet interface, RJ45 interface |
Indicator LED | 10 pcs,refer to NO.6 definition of indicator LED |
DC supply interface | input+12V 1A,footprint:DC0005 ø2.1MM |
Power | ≤7W |
Operating temperature | -5~+55℃ |
Humidity | 10~85%(non-condensation) |
Storage temperature | -30~+70℃ |
Dimension(MM) | 150*110*36mm(mainframe) |
Weight | 0.5Kg(mainframe) |
WIFI characteristics | |
Tech features | description |
antenna | 2T2R Mode; gain:5dBi |
rate | 300Mbps IEEE802.11n 866 Mbps IEEE802.11ac The number of channel :13 for wifi4;12 for wifi5 |
encryption methods | WFA、WPA、WPA2、WAPI |
Tx power | 17dBm for 2.4GHz ;19dBm for 5GHz |
Rx sensitivity | WIFI4:-59dBm @ channel 11 MCS7; WIFI5:-50dBm @ channel 155 AC80; |
WPS function | Support |
VOIP Technical features | |
Voltage and Current Monitoring | The continuously monitors the TIP, RING, and battery voltages and currents via an on-chip Monitor ADC |
protocol | Protocol : SIP; Codec type selection :G722,G729,,G711A,G711U, FAX:T38; |
Thermal Overload Shutdown | If the die temperature exceeds the maximum junction temperature threshold, the device will shut itself down |
Ordering information
Item name | Mode NO. | Suffix of Mode NO. |
ONU:4LAN+2WIFI+VOIP | 3434G4R | 4GE-2.4G&5GWIFI-POTS |
ONU:4LAN+2WIFI | 344G4R | 4GE-2.4G&5GWIFI |
Packing list | ||
Name | Quantity | Unit |
XPON ONU | 1 | pcs |
supply power | 1 | pcs |
Manual & warranty card | 1 | pcs |
Installation and Initialization
1.insert SC/APC fiber patch cord or pigtail into PON interface of the
2. use the network untwised-pair from network equipment to the Lan Interface of product, the LAN interface of this product
supports the AUTO-MDIX function.
3. Offer product power, Please use the DC plug of adapter to connect with the DC socket of the product , and the AC plug of the
power adapter should be plugged into the AC socket.
4. The power will be connected successfully if the PWR indicator ON ,the system will be into initial stage, and then ,to wait
for the completion of system initialization
1.insert SC/APC fiber patch cord or pigtail into PON interface of the
2. use the network untwised-pair from network equipment to the Lan Interface of product, the LAN interface of this product
supports the AUTO-MDIX function.
3. Offer product power, Please use the DC plug of adapter to connect with the DC socket of the product , and the AC plug of the
power adapter should be plugged into the AC socket.
4. The power will be connected successfully if the PWR indicator ON ,the system will be into initial stage, and then ,to wait
for the completion of system initialization
Definition of indicator LED
symbol | color | meaning |
PWR | green | ON:successfully connect with power OFF:fail to connect with power |
PON | green | ON:ONU port Link correctly Flicker: PON registering OFF:ONU ports link faulty |
LAN | green | ON: Link up correctly Flicker: data is transmitting OFF: link down faulty |
TEL | green | ON: Register success OFF:Register fail |
WIFI | green | ON: WIFI is running OFF:WIFI startup fail |
LOS | red | Flicker: fail to connect with PON port OFF: detected fiber to input |