Car Body Paintless Dent Repair Tool Set Auto Part Mechanical Sheet Metal Slide Multiple size Suction Cup Puller Glue Kit

(No reviews yet) Write a Review

SKU:
UPC:
MPN:

$9.98 - $17.12

Current Stock:

Quantity:

Description

Description

【Note】
The Size: Puller Kit does not contain glue. If you need to, simply buy Glue Gun and Glue Sticks additionally

Puller Kit (No Glue)
Packing lncluded:
18x Blue Tabs
1x T Bar Tools

29Pcs(EU plug / US plug)
Packing lncluded:
18x Blue Tabs
1x T Bar Tools
1x Shovel
1x Towel
1x Alcohol Bottle(Alcohol not included)
1x The Instruction
3x Yellow 7*270mmGlue Sticks
2x Black 7*270mmGlue Sticks
1x 20W Glue Gun(US/EU Plug)

Specification:
Material: Aluminum Alloy
Color:As the picture show
Type: M10
Size: As the picture show

How to use this paintless dent repair kits :
1.Clean the dent with a clean wet cloth
2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the
drawing gasket is, the larger the drawing force is)
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue)
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter)
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen
8. Clean the repaired place with a clean wet cloth