BeneCheck 3in1 Blood Glucose&Uric Acid&Cholesterol Meter Household Glucometer Kit Diabetes Gout Tester Monitor Device&Test Strips

Specification:
Material: ABS
Color: White + Grey
Power Mode: Use coin cell batteries
Memory Capacity: 460 (in all)
Battery: 1x 3V CR2032 (NOT included)
Battery Life: About 1000 Times
Test Temperature: 10 ~ 40 (50 - 104)
Storage Temperature: 10 ~ 30 (50 - 86)
Lancing Pen Size: 105 x 20 mm / 4.13 x 0.79 inch
Digital Meter Size: 86 x 58 x 23 mm / 3.39 x 2.28 x 0.91 inch
Storage Bag Size: 160 x 100 x 30 mm / 6.30 x 3.94 x 1.18 inch

Cholesterol Measuring:
Test Sample: Capillary Blood
Blood Amount: 10l
Memory Capacity: 50
Measurement Time: 26 seconds
Range: 2.59 - 10.35mmol/L (100 - 400mg/dl)

Blood Glucose Measuring:
Test Sample: Capillary Blood
Blood Sample: 0.7l
Memory Capacity: 360
Measurement Time: 10 seconds
Range: 1.1 - 33.3mmol/L (20 - 400mg/dl)

Uric Acid Measuring:
Test Sample: Capillary Blood
Blood Sample: 0.7l
Memory Capacity: 50
Measurement Time: 15 seconds
Range: 0.18 - 1.19mmol/L (3 - 20mg/dl)


Using Steps:
Step 1. Washing hand
Step 2. Unscrewing blood sampling pen
Step 3. Putting the needle into the blood sampling pen
Step 4. Unscrewing the needle protect cover and keep the protect the cover
Step 5. Screwing the blood sampling pen
Step 6. Adjusting the number for the needle depending on personal situation (1 is for shallowest, 5 is for deepest)
Step 7. Pull the back of the pen and it will rebound back
Step 8. Taking a test strip
Step 9. Insert the test strip
Step 10. Pressing S button to adjust the correction code and press M button to save
Step 11. Using blood sampling pen to take some blood
Step 12. Drawing blood sample
Step 13. The result shown after several seconds
Step 14. Disposing of waste correctly
Step 15. Putting the protecting cover on needle and disposing medicine waste correctly