Low Odor

Safe to use

It has passed RoHS and REACH testing, and meets the EU EN71-3:2013 toy testing standard, making it safer to use.

Soybean Raw Material

Using soybean oil as raw material, the source is green and environmentally friendly, biodegradable, originating from nature and returning to nature.

Low Shrinkage

The molding process is not deformed, the finished product surface is smooth, the shrinkage rate is low, and the printing accuracy is high.

Wide applicability

355nm-410nm broadband, suitable for most light curing 3D printers

Rigid Resins vs Plant-Based Resins

Resin parameters

Hardness:89D Bending strength: 49-58MPa

Viscosity:150-350MPa s(25℃) Tensile strength:42-62MPa

Shrinkage：1.88-2.45% Glass transition temperature 110±5℃

Shelf life： 1 year Heat distortion temperature75±5℃

Solid density ：1.05-1.25g/cm3 Elongation at break:11%-20%

Curing wavelength: 355nm-410nm Thermal expansion coefficient: 95*E-6

Application industry

Resin Color

The products are all real shots. Due to different lighting or display settings, there are different degrees of color difference. Please refer to the actual color for the final color.

Model Display

Usage notice

Shake well before use, wear gloves and masks when using, it is recommended to use the ambient temperature of 25-30 ℃, avoid dust environment and direct light.

Precautions

*If printing large models or solid models, please add bottom valve printing or evacuate model printing in the slicing software, so as to maximize theMinimize model warping probability.

* This product cannot be taken orally, keep away from children, and cannot get into eyes. In case of accidental contact, please rinse with plenty of water as soon as possible.

If you feel unwell, please seek medical attention in time.

Preservation Instructions

It is recommended to store at an ambient temperature of 25℃-35℃. The lower the temperature, the higher the resin viscosity. Sealed storage to avoid dust Too much or damp, affecting the print quality.

Store in shading, the sunlight contains a lot of ultraviolet rays, which will cure the photosensitive resin.