ANYCUBIC ABS-Like Pro 2

Toughness Upgrade | High-success rate | Low-odor

Strong and Tough

Based on the excellent tensile and bending strength of the previous version of ABS-like resin + , Anycubic ABS Pro 2 strengthens the toughness performance, increases the elongation at break by more than 100%, and the finished model is stronger and more durable, which can be used to print high-strength and high-toughness models such as structural parts, industrial prototype parts, and fixtures.

Recommendation Index

High flowability, High success rate

Low viscosity and high flowability shorten curing time and make models easier to form. The resin enables fast reflow, reducing delamination in model print. At the same time, the backplane adhesion is better, effectively reducing the risk of printing failure.

Low Odor for Peaceful Printing

Our low-odor formula reduces discomfort for those sensitive to smells, creating a more comfortable printing environment.

High Precision with Minimal Shrinkage

With an even lower shrinkage rate, the chance of distortion is decreased. Achieve top-notch precision and display sharp, vivid details in your prints.

Optimized and Upgraded, A Vibrant Palette

Our resin offers a wide array of color options with exceptional, long-lasting color retention. Specifically, our black ABS-Like Pro 2 has undergone special upgrades to enhance color saturation and richness in printed models.

High Compatibility, Enhanced Protection

Compatible with a wide range of LCD and DLP 3D printers operating within the 365-405nm wavelength, our resin offers seamless integration with most printers on the market.

The safety packaging with leak-proof design and multiple protective measures ensure worry-free handling, eliminating concerns of damage or leakage.

Resin Parameters

UV wavelength:365-405nm

Elongation at break:30-40%

Densit :1-1.2g/cm³

Molding shrinkage :4.3-5.6%

Viscosit :80-200 cPimPa·s

Flexural strength :40-50MP）

Hardness :80-85D

Felxural modulus:1000-1200 MPa

Tensile strength :85-45 MPa

Heat deflection temp:60-65℃

Bottom exposure time:20-40s

Resin wash:Alcohol

Normal exposure time:1.5-3S

Shelf life:1.5 Year

Available Colors

Black、White、Grey、Beige、Translucent green、Transparent Color

Model Demo

Recommended Printing Parameters