• Biodegradable and made from soybean oil, truly eco-friendly.

• No VOCs, no BPA, no harmful chemicals. Complied with EN 71-3:2013 safety standard.

• Optimized curing time for Anycubic Photon, offering better printing quality.

• Sensitive to 355nm~405nm UV light. Compatible with most LCD/DLP 3D printers.

Usage condition

● Shake up the bottle before use and avoid direct sunlight and dust.

● Wear a mask and gloves to avoid direct skin contact and maintain indoor ventilation.

● Recommended usage temperature: 20-25℃.

● Once the model is complete, please wash it with ethanol alcohol for at least 30 seconds or with dish wash liquid solution.

Attention

● When printing large model, please increase the build plate contact of the model or lower the infill density to avoid wrapping.

● Wash with plenty of water immediately if got accidently skin contact.

● If feel discomfort after you got skin contact, please see a doctor ASAP.

● Do not drink it and keep it sealed and out of the reach of children.

Storage

● Store in a dry and dust-free place under 15℃-35℃.

● Keep it sealed and keep it away from sunlight.