Description

ANYCUBIC 405nm Resin for Photon 3D Printer LCD UV Sensitive Resin 500ml Liquid Printing Material

Resin parameter

Hardness: 79 D

Viscosity(25℃): 552 mpa.s

Curing wavelength: 405 nm

Liquid density: 1.1

Solid density: 1.184 g/cm⊃3;

Shrinkage: 7.1%

Tensile strength: 23.4 Mpa

Curing time: 6-10 s

Elongation at break: 14.2%

Shelf life: 1 year

Terms and Conditions:

Shake well before use,please wear a glove mask,the recommended temperature 20-25 ℃, to avoid dust and the environment.

Precautions:

This product can not be taken orally. Keep away from children. Do not enter the eyes. In case of accidental contact, flush with plenty of water as soon as possible. If not, consult a doctor promptly.

Save notes:

It is recommended to store at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed, dusty or damp, affecting print quality. Shading preservation, the sun contains a lot of ultraviolet light, will cure photosensitive resin.