4.8mm Flat terminal with anti-down switch Thermocouple head is Groove Type fixed on Bracket by clips
Specifications: Color: White Type 350mm Groove Type 4.8mm terminal Length: Total length 350mm, Two wire 30cm and 20cm Item weight: 8 ounces Suitable for: gas Patio Heater Usage: This thermocouple is used for outdoor patio heater.
Install steps: 1). install the thermocouple tip on a board and use two nuts to fix its location 2). Keep the tip about 5mm from the burner hole. 3). Fix the thermocouple nut M8 on the valve end tightly (Check if your valve end thread is 8mm before your buying) 4). Connect two flat terminals well with the current tilt switch terminals. 5). Turn on the gas and push your valve 5-10s till the thermocouple end is heated. 6). Release your hand and it work well. If failed, please check a. If your thermocouple is heated on flame b. If the thermocouple end is well connected with valve c. If the terminals connect tilt switch well.
Package included: 1Pc x 350mm Groove Type Universal Thermocouple
DescriptionThe safety tilt component kit is an essential accessory for any heating device. This kit includes a thermal probe that detects the temperature of the heating element and a tilt that...
DescriptionIf you are looking for a professional and affordable thermocouple and tilt set, then your research is over here. That's because our product can meet your need. Adopted of brass and plastic...