Feature: 

 * New and high quality.

* High-definition and 170 degree wide viewing angle

* Applicable to varieties of vehicles: car, truck, RV, etc.

* Snap-in design, easy to install

* Its simple and small size will not draw any attention

* It helps to avoid incidents and accidents abrasion well  

Specification:

*Condition: Brand new

*Color: Black

*Type: Car Rear View Reverse Camera

*Sensor: 1/3-inch Color CMOS

*Effective Pixels: 656x492

*TV System: NTSC

*Lens Angle: 170 degree

*Electronic Shutter: 1/60-1/20000s

*Minimum Illumination: 0.1 Lux/F=1.2(0 Lux with IR on)

*Video Output: 1.0 VP-P,75 OHM

*Power Supply: DC 12V

*Operating Temperature: -20 degree Celsius to +75 degree Celsius (RH95%Max.)

*Storage Temperature: -40 degree Celsius to +85 degree Celsius (RH95%Max.)

*Universal Fitment=YES

Crystal clear images in all weather conditions Easy Installation:

1. Mount the camera to your car's license plate area, back casement, or any other suitable place

2. Adjust the lens of the camera to its best position.

3. Connect power wire (red and black) to your vehicle DC 12V power system.

4. Connect the video output (yellow wire) of the camera to the display in your vehicle.

5. Image device: Hi-definition Color CCD

6. TV system: NTSC - Effective pixels: 628 X 586 pixels/510 x 496 Pixels

7. Resolution: 420 TV lines

8. Power supply:DC 9V-36V

Package content:

1 x Car Rear View Camera

1 x Video Cable

1 x Power Cable

1x  Instructions

Note:

1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2. Please allow slight manual measurement deviation for the data.