Package Includes:

1Pair x Heated Handlebar Grip, 1 x Double-sided Tape, 5 x Tie, 1 x Bracket.

Description:

*1. Packing Size: 12.1*3.6*16.1 cm

*2. Input: DC12V

*3. Cable Length: 105 cm(from heating plate to switch), 142CM (from switch to lock)

*4. Operating Temperature: -30°c to +100°C

*5. Power: 15W-20W-25W

*6. Material: composite fiber heating wire+cloth+stainless steel

*7. Wiring: Red-Positive(+), Black-Negative(-), NOTE: heat but the indicator light does not work when the wiring reverses

*8. Indicator Light: Red ON(25W), Blue ON(20W), Green ON(15W); Red Flash(Standby); Red+Blue+Green flash once(Power off)

Attention:

*1. Please select the appropriate gear according to the ambient temperature. Under low temperature conditions, when the temperature of the electric heating handle sleeve cannot be sensed accurately and timely due to stiff hands, please use low(15W) or middle(20W) gear first to prevent high temperature burns.

*2. This product is only suitable for motorcycles with 12V batteries. Please read the installation diagram carefully before installation. The wrong wiring method will lead to component damage.

*3. This product can only be installed on the handle of motorcycle for power-on. Before installation, you can use the battery to test whether the product is powered on correctly.

*4. It is strictly forbidden to power on when not riding (empty burning), in order to prevent the temperature of the electric handlebar cover from being too high and damaging the original handlebar.

*5. It is recommended to connect to the electric lock. Most models are black positive and green negative. It is recommended to use a multimeter to measure the specific situation.